What is a Hyundai i10 IA airbag control unit?
The Hyundai i10 IA airbag control unit is your vehicle's central safety unit, activating all occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of an accident. It continuously monitors relevant sensors, stores important crash data, and ensures the proper functioning of the entire safety system to maximize your safety.
This electronic module receives signals from impact sensors in the vehicle. Based on this data, it evaluates the severity of the impact and instantly triggers the appropriate protective measures.
After a deployment, the control unit stores the crash information. This is important for diagnosis and possible Hyundai i10 IA airbag control unit repair.
Why is the Hyundai i10 IA airbag control unit defective?
The Hyundai i10 IA airbag control unit may be defective because it stores crash data after an accident that needs to be erased, or because of internal communication errors. Other common causes include overvoltage damage or wiring problems that lead to system failure.
A very common cause of a faulty control unit is a crash code stored after an accident. These "hard codes" can only be removed by specialized Hyundai i10 IA airbag control unit repair services.
Other causes could be communication errors on the CAN bus or power supply issues. This can damage the airbag system and cause the warning light to illuminate.
In rare cases, the control unit itself may suffer internal damage. However, external factors such as water ingress or defective sensors are often the actual cause of a failure.
Common error codes for Hyundai i10 IA airbag control unit repair
During a Hyundai i10 IA airbag control unit repair, specific error codes are typically read out, indicating problems within the airbag module or its communication. These codes assist the workshop in diagnosing the problem and quickly identifying and correcting the cause of the problem.
- B1000 → Communication error → Data transmission fault in the airbag control unit, e.g. CAN bus.
- B1346 → Driver airbag resistance too high → Problem in the driver airbag circuit, e.g. defective squib or broken cable.
- B1650 → Crash in 1st stage frontal recorded → Non-erasable hard code saved after an accident.
- B00XX (general) → Communication error between control unit and sensors → General communication problems in the airbag ECU area.
These error codes are essential for a precise diagnosis. Repairs can then be carried out specifically, often by resetting or replacing the device.
Some codes, such as B1650, require a special ECU reset. Standard diagnostic tools cannot clear these hard codes.
What part numbers are available for the Hyundai i10 IA airbag control unit repair?
For Hyundai i10 IA airbag control unit repairs, there are several verified OEM part numbers that are functionally identical and can be used for replacement or repair. These genuine Hyundai numbers ensure that the replacement part is a perfect fit for your vehicle and that the airbag system's full functionality is guaranteed.
The following Hyundai OEM part numbers are relevant for the airbag control unit of the Hyundai i10 IA and have been confirmed by several sources:
95910B9250, 95910-0X000, 95910-0X600, 95910-0X100 and the used number 202009795.
These numbers are identified as genuine Hyundai parts. They can be used when sourcing a replacement part or for a professional Hyundai i10 IA airbag control unit repair.