What is a Hyundai Tiburon RD airbag control unit?
The Hyundai Tiburon RD airbag control unit is the central safety unit that activates all passive occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of a collision. It continuously monitors sensors, stores relevant crash data, and ensures the vehicle's entire airbag system is operational at all times for your safety.
This module, also called SRS Airbag Control Module, is crucial for occupant safety in the Hyundai Tiburon RD.
It acts as the brain of the airbag system, evaluating sensor data and deploying the airbags at lightning speed when necessary.
Why is the Hyundai Tiburon RD airbag control unit defective?
A Hyundai Tiburon RD airbag control unit often malfunctions because it permanently stores crash data after an accident, necessitating reprogramming or a reset of the unit for Hyundai Tiburon RD airbag control unit repair. Other causes can include internal circuit failures, power surges, or age-related wear and tear that impair its function.
The most common cause of a defective status is the storage of "hard codes" after an airbag deployment.
This crash data prevents the system from functioning again and must be deleted by special services.
Electrical problems or water damage can also cause the control unit to fail.
A defective module is usually indicated by a permanently lit airbag warning light in the dashboard.
Common error codes for Hyundai Tiburon RD airbag control unit repair
During Hyundai Tiburon RD airbag control unit repairs, specific error codes may occur that indicate problems within the unit or its communication, rather than with individual sensors. These codes often signal crash data storage or internal system errors that require specific diagnostics.
- B1000 → Control unit communication error → Signals a faulty communication within the airbag ECU.
- (Crash Data stored) → Hardcode crash data after accident → Requires a specialized reset of the control unit.
- B1620 → Crash data stored (airbag system error) → Indicates that accident data is stored in the module.
- B1414 → Side Impact Sensor (Driver) Wrong ID → Indicates an identification error of the side impact sensor in the control module.
- B1415 → Side Impact Sensor (Passenger) Wrong ID → Indicates an identification error of the passenger side impact sensor in the control module.
- B1378 → Side Airbag Resistance Too High → Reports an inadmissibly high resistance in the side airbag circuit of the control unit.
- B1382 → Side Airbag Resistance Too High → Another code for excessive resistance in the side airbag circuit.
These error codes are primarily ECU-specific and indicate internal problems or configuration errors in the control unit.
For a successful Hyundai Tiburon RD airbag control unit repair, it is crucial to correctly interpret these codes and, if necessary, to request a reset service.
What part numbers are available for the Hyundai Tiburon RD airbag control unit repair?
For Hyundai Tiburon RD airbag control unit repairs, specific original Hyundai OEM part numbers must be used to ensure full compatibility and functionality. Exact part number matching is crucial, as minor deviations can lead to incompatibilities.
The primary and most confirmed part number is 95910-27350.
Other verified OEM part numbers for the Hyundai Tiburon RD airbag control unit include:
- 959102C500
- 959102C100
- 95910-27350-68HC05B16 (an extended designation)
These numbers are for airbag control units only and not for sensors or subcomponents.
It is essential to compare the part number installed in the vehicle with that of the replacement part.
Compatible vehicle models and years of manufacture for the Hyundai Tiburon RD airbag control unit repair
The Hyundai Tiburon RD airbag control unit repair primarily applies to models built between 1997 and 2001, including specific variants. Compatibility depends heavily on the exact part number, so matching the existing module is essential for a successful repair.
The control unit is primarily designed for the Hyundai Tiburon RD and similar models in the coupe series.
Variants such as the Hyundai Tiburon Tuscani also fall within the compatibility area.
Before repairing your Hyundai Tiburon RD airbag control unit, make sure the part number of the replacement unit exactly matches the original part.
Installation location and maintenance of the Hyundai Tiburon RD airbag control unit
The Hyundai Tiburon RD airbag control unit is usually located centrally behind the center console or under a front seat. To safely repair or replace the Hyundai Tiburon RD airbag control unit, it is essential to disconnect the vehicle's battery before beginning work to prevent accidental deployment.
Installation requires care and expertise as it is a safety-relevant component.
After an accident, the module often needs to be reset or repaired to erase the stored crash data.
Specialized workshops offer this reset service, which can be a more cost-effective alternative to a complete replacement.
Sometimes after the Hyundai Tiburon RD airbag control unit repair, recoding to the vehicle VIN is necessary.