What is a Jaguar XJ X351 airbag control unit?
The Jaguar XJ X351 airbag control module, also known as the Restraint Control Module (RCM), is the central electronic unit that controls all occupant restraint systems in the event of an accident. It monitors sensors, stores important crash data, and precisely deploys airbags and seatbelt pretensioners in the event of an accident, which is crucial for any Jaguar XJ X351 airbag control module repair.
This module processes signals from acceleration and crash sensors. It decides within milliseconds whether to activate the pyrotechnic safety devices.
The control unit operates on a 12V vehicle electrical system. It is networked with other control units such as the ABS and the engine management system via high-speed data buses.
After an accident, the module can typically be reset or repaired, allowing it to return to full operation and ensure safety.
Why is the Jaguar XJ X351 airbag control unit defective?
A Jaguar XJ X351 airbag control unit is often defective because it stores crash data after an accident, preventing it from being restarted. Internal hardware errors, voltage problems, or communication disruptions are other common causes of failure. A professional Jaguar XJ X351 airbag control unit repair is essential to restore the safety system's full functionality.
After the airbags are deployed in the event of an accident, the control unit stores an irreversible crash data record. This prevents further function and signals the need for repair or a reset.
Voltage problems such as undervoltage or overvoltage can damage the sensitive electronics, leading to internal errors or complete failure of the module.
Communication errors with sensors or other control units are also common causes. This can disable the entire airbag system and activate the SRS warning light.
Common error codes for Jaguar XJ X351 airbag control unit repair
When repairing a Jaguar XJ X351 airbag control unit, specific trouble codes are crucial for a precise diagnosis. These codes, such as B1000 or B1342, directly indicate problems within the Restraint Control Module (RCM), including internal defects, communication failures, or misconfigurations that require immediate attention.
- B1000 → Control unit communication error → Signal loss or internal fault in the airbag ECU (RCM)
- B1001-13 → Right Hood deployment control – Permanent error → Problem with pedestrian protection airbag control in the airbag ECU (RCM)
- B1003-13 → Left Hood deployment control – Permanent error → Problem with pedestrian protection airbag control in the airbag ECU (RCM)
- B1004-87 → Right Frontal impact classification sensor – Permanent error → Sensor error or communication problem with RCM in the airbag ECU (RCM)
- B0001-13 → Driver's frontal stage 1 deployment control → Error in the driver's airbag deployment circuit in the airbag ECU (RCM)
- B1870 → AIRBAG SRS MIL circuit short circuit → Short circuit in the indicator light circuit of the airbag ECU (RCM)
- B1865 → SRS system voltage low (<8.3 V) → Undervoltage in the vehicle electrical system or internally in the RCM of the airbag ECU (RCM)
- B1866 → SRS system voltage high (>18.3 V) → Overvoltage in the vehicle electrical system or internally in the RCM of the airbag ECU (RCM)
- B1869 → AIRBAG SRS MIL circuit open circuit → Open circuit in the warning light circuit of the airbag ECU (RCM)
- B1342 → Single Point Sensor module internal fault or crash record full → Internal defect or crash record full in the airbag ECU (RCM)
- B1414 → Incorrect components installed → Incompatible or faulty RCM components in the airbag ECU (RCM)
- U2017 → Communication error side driver airbag impact sensor → Malfunction of the data connection to the driver's side airbag sensor in the airbag ECU (RCM)
- U2018 → Communication error Side passenger airbag impact sensor → Malfunction of the data connection to the passenger side airbag sensor in the airbag ECU (RCM)
- 24 → RCM (restraints control module) internal error → Internal hardware or software defect of the airbag ECU (RCM)
- 54 → RCM configuration error → Incorrect programming or adaptation of the airbag ECU (RCM)
These specific error codes are essential for any successful Jaguar XJ X351 airbag control unit repair. They help pinpoint the exact cause of the malfunction.
Errors such as B1342 and internal RCM errors (codes 24, 54) often require specialized repair of the control module itself. Other codes indicate communication problems.
What part numbers are available for Jaguar XJ X351 airbag control unit repair?
Several part numbers are relevant for a Jaguar XJ X351 airbag control module repair, with C2D5633 being the primary Jaguar OEM number for the airbag control module (RCM). While other numbers, such as C2D54290PVJ, represent individual airbag modules, they are important for system integrity and should be considered during a comprehensive repair to ensure compatibility.
The most commonly required OEM part number for the Jaguar XJ X351 airbag control unit itself is **C2D5633**. This number is listed by Jaguar Land Rover as the original airbag module.
During a complete system check, other OEM part numbers for related airbag components may also be relevant. These include, for example, the **driver airbag (C2D54290PVJ)** and the **passenger airbag (ZLE JA X351 DAB)**.
Equally important is the part number for the curtain airbag (AW9314K160BC), as these components are controlled directly by the control unit. All numbers mentioned are genuine Jaguar OEM parts.
Please note that specific supplier part numbers from Bosch or Continental often carry Jaguar internal OEM numbers. A professional Jaguar XJ X351 airbag control unit repair includes a thorough verification of these numbers.