What is a MINI Cooper S Countryman R60 airbag control unit?
The MINI Cooper S Countryman R60 airbag control unit is the central safety unit that precisely activates all occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of an accident. It continuously monitors all associated sensors, stores relevant crash data, and ensures the correct functioning of all passive safety systems in your vehicle.
This essential component is responsible for detecting a collision and instantly deploying the restraint systems to protect the occupants. It processes signals from acceleration sensors and crash sensors in the vehicle.
A functioning control unit is essential for operational safety, as it also monitors the status of all airbag modules and reports errors to the airbag warning light in the cockpit. After an accident, the module often needs to be checked and reprogrammed.
Why is the MINI Cooper S Countryman R60 airbag control unit defective?
The MINI Cooper S Countryman R60 airbag control unit often fails because crash data is permanently stored after an accident, preventing it from functioning again without reprogramming. Internal module errors or communication problems can also occur, leading to the failure of the entire safety system.
A common cause of a defective status is the storage of crash data, for example, after a parking bump or a rear-end collision. This data blocks the system, causing the airbag warning light to remain permanently illuminated.
Age-related wear and tear or electrical malfunctions can also lead to internal errors in the control unit. This often manifests itself in specific error codes that allow for a precise diagnosis of the failure.
A power failure or incorrect installation can also damage the airbag control unit. A professional diagnosis at a workshop is essential in this case.
Common error codes for MINI Cooper S Countryman R60 airbag control unit repair
During MINI Cooper S Countryman R60 airbag control unit repair, specific error codes occur that indicate problems with the control unit itself, rather than with sensors or airbags. These codes indicate internal errors, communication malfunctions, or crash data storage that require immediate repair.
- B1000 → Control unit communication error → Communication with the airbag control unit is disrupted.
- B1015 → Airbag module error → An internal defect in the airbag control unit was detected.
- B1139 → Error within the SRS control unit → The entire SRS control unit is malfunctioning.
- B1193 → Airbag module related error → There is a problem with the internal logic of the airbag module.
- B1206 → Airbag RCM (Restraint Control Module) Error → The restraint system module has detected an error.
- B1342 → SRS system error → There is a comprehensive error in the entire occupant protection system.
- B1620 → SRS system failure → Another general defect in the passive safety system.
- B1649 → Crash detected in the control unit → The control unit has registered an accident and is blocked.
These error codes can be read with special OBD-II diagnostic tools and provide important information for repairing the control unit. Soft codes can often be erased, while hard codes require a reset or replacement.
Code B1649, in particular, indicates that the control unit has experienced an accident, which requires reprogramming or a module reset by a qualified technician. A repair is often more cost-effective than a new part.
What part numbers are available for the MINI Cooper S Countryman R60 airbag control unit repair?
There are several OEM part numbers available for the MINI Cooper S Countryman R60 airbag control unit repair, all of which are compatible and ensure full functionality of the restraint system. The main part number, 65779812297, is widely used, but older, retroactively compatible alternatives can also be repaired.
The most relevant OEM part numbers for the airbag control unit in the MINI Cooper S Countryman R60 (model years 2011–2016) have been thoroughly tested. These modules are specifically designed to monitor and deploy airbags.
Please note that after installation, the airbag control unit must be programmed to the vehicle to ensure proper function and to deactivate the airbag warning light. This should always be performed by a specialized workshop.
- 65779812297 (main number)
- 65779811224 (replacement/alternative)
- 65779809354 (replacement/alternative)
- 65779808714 (replacement/alternative)
- 65779807169 (replacement/alternative)
- 65773454346 (previous part)
- 65773451779 (previous part)
- 65773428715 (Older original part)