What is a Peugeot 1007 I airbag control unit?
The Peugeot 1007 I airbag control unit is the central safety unit that precisely activates all occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of an accident. It continuously monitors associated sensors and stores crash data, thus ensuring the proper functioning and safety of the vehicle's restraint system.
This essential component processes signals from various impact sensors. Its main task is to control the pyrotechnic airbag and seatbelt pretensioner systems.
The control unit ensures that the airbags are only deployed when necessary and with the correct intensity.
Why is the Peugeot 1007 I airbag control unit defective?
A Peugeot 1007 I airbag control unit often fails due to internal component failure, communication errors, or the unit storing crash data after an accident that prevents it from restarting. These defects can activate the airbag warning light and impair the functionality of the safety system.
After an impact, the airbag control unit stores irreversible crash data. This data prevents the airbags from deploying again until the control unit is reset.
Internal electronic defects or signs of aging can also lead to failure. This often manifests itself in a permanently illuminated airbag warning light on the dashboard.
Communication errors between the control unit and other vehicle systems are another common cause of a defect. This can complicate diagnosis and a successful Peugeot 1007 I airbag control unit repair.
Common error codes for Peugeot 1007 I airbag control unit repair
For Peugeot 1007 I airbag control unit repairs, the primary error code is B1000, which indicates an internal defect or communication problems within the control unit itself and causes the airbag warning light to illuminate continuously. Other code-specific messages are less common and usually sensor-related.
- B1000 → Control unit defective / communication error in the airbag ECU → Internal defect or crash data stored after an accident.
The error code B1000 signals a serious error in the airbag control unit itself. It often indicates a necessary Peugeot 1007 I airbag control unit repair.
This code can occur after an accident if crash data was stored that requires a system reset. Internal malfunctions in the control unit can also be a cause.
Sensor-related error codes affecting belt tensioners or other components are not directly related to the control unit. They are excluded from the specific Peugeot 1007 I airbag control unit repair.
What part numbers are available for the Peugeot 1007 I airbag control unit repair?
For Peugeot 1007 I airbag control unit repairs, various OEM part numbers have been verified as exact and safe to use, including models from Peugeot and Temic that guarantee identical functionality. These have been independently verified multiple times and are exclusively compatible with the Peugeot 1007 airbag control unit.
The following OEM part numbers are confirmed for the Peugeot 1007 airbag control unit:
- 9656700980 (Original Peugeot)
- 9663176380 (Original Peugeot)
- 9663176580 (Temic OEM original)
- 96 631 763 80 (Temic OEM original)
- 96 631 765 80 (Temic OEM original)
These part numbers are specific to Peugeot 1007 airbag control units. They should not be confused with airbag sensors or other modules.
The numbers listed have been validated by independent sources such as parts owners and Speedline Instruments. This confirms their suitability for a reliable Peugeot 1007 I airbag control unit repair.
Technical details and compatibility for the Peugeot 1007 I airbag control unit repair
The Peugeot 1007 I airbag control unit is relevant for models from 2005 to 2006 with a KFV engine. It is typically gray and weighs approximately 1 kg. It monitors and controls airbags, stores crash data, and must be reset or repaired after an accident to restore full safety functions.
The control unit usually has an ETS-gray housing and weighs approximately 1.0 kg. It is intended for use in Peugeot 1007 models with the engine code KFV.
Compatibility extends to vehicles with manual and automatic transmission, built from approximately 2005 to 2006. It is designed for the 2-door Peugeot 1007.
The unit continuously monitors airbag sensors and transmits data to the yellow airbag connectors with 2-3 gold-plated contacts. Professional diagnostics are essential in the event of failures.
The airbag control unit is typically installed in the center console or under the driver's seat. This location protects it from external influences.
A professional Peugeot 1007 I airbag control unit repair is often possible after an accident. This avoids the costly purchase of a new unit, erasing crash data, or replacing defective components.
It is crucial that repairs or replacements are carried out exclusively by qualified specialist workshops. This is the only way to ensure the full functionality and safety of the airbag system.