What is a Peugeot e-2008 II airbag control unit?
The Peugeot e-2008 II airbag control unit is the vehicle's central safety unit, continuously processing data from impact sensors. In an emergency, it decides within milliseconds which airbags and seatbelt pretensioners need to be deployed to optimally protect the occupants. It thus ensures the coordinated activation of all passive safety systems.
It acts as the central control center of the airbag system and continuously processes data from various crash and acceleration sensors.
Through this real-time evaluation, it ensures coordinated activation of safety components such as driver, passenger, side and head airbags as well as the belt tensioners.
Why is the Peugeot e-2008 II airbag control unit defective?
The Peugeot e-2008 II airbag control unit can become defective because it irreversibly stores crash data after an accident, preventing further use without a special reset. Age-related wear, overvoltage, or moisture ingress are also common causes of failure, requiring immediate Peugeot e-2008 II airbag control unit repair.
After an airbag or seat belt pretensioner is deployed, the control unit often stores a "crash data record."
This record prevents the device from being used again until a professional Peugeot e-2008 II airbag control unit repair or replacement has been carried out.
Electronic components can also wear out over time or be irreversibly damaged by short circuits, overvoltage or water damage, causing a failure.
Common error codes for Peugeot e-2008 II airbag control unit repair
Specific error codes for the Peugeot e-2008 II airbag control unit (part number 98 237 413 80) are not publicly listed for repairing the airbag control unit. However, generic error codes may indicate deployed airbags, seatbelt pretensioners, or communication problems within the system. A professional diagnostics at a workshop is essential for precise troubleshooting.
- B1000 → Control unit communication error → interruption of the data line or internal defect
- 1712 → Front and rear airbags deployed → Frontal impact that activated the front airbags
- 1696 → Belt tensioners triggered → Accident event that activated the belt tensioners
- 1728 → Driver's side airbag triggered → Side impact on the driver's side
- 1730 → Left head airbag deployed → Side impact that activated the left head airbag
What part numbers are available for the Peugeot e-2008 II airbag control unit repair?
For the Peugeot e-2008 II airbag control unit repair, only one 100% verified, exact OEM part number is currently known. This specific number for the original airbag control unit is 98 237 413 80 and is assigned exclusively by Peugeot itself, as no alternative or supplier part numbers could be verified.
The part number 98 237 413 80 is an OEM number that is explicitly listed as an airbag control unit for the 2nd generation Peugeot 2008.
This number has been independently confirmed multiple times by various sources and is valid only for the airbag control unit, not for sensors or other modules.
No other OEM numbers or supplier part numbers (e.g. from Bosch, Continental) for this specific control unit were found in the catalogs searched.
When repairing a Peugeot e-2008 II airbag control unit, precise identification using this number is crucial to ensure compatibility and safety.