What is a Chevrolet Camaro SS 6th Gen airbag control module?
The Chevrolet Camaro SS 6th Gen airbag control unit is the central unit of the occupant protection system. It continuously monitors all relevant sensors, detects accidents, and precisely activates airbags and seatbelt pretensioners when necessary. This module also stores important crash data and ensures system integrity for maximum safety.
This module, also known as the SRS SDM (Supplemental Restraint System Sensing Diagnostic Module), is critical for the safety of vehicle occupants. It processes real-time data from various sensors to react within seconds in the event of a crash. Correct functioning is essential for controlling the airbag system and activating its protective functions.
Why is the Chevrolet Camaro SS 6th Gen airbag control module defective?
A Chevrolet Camaro SS 6th Gen airbag control unit often fails after an accident because it permanently stores crash data, requiring a module replacement. Internal malfunctions, overvoltage, or water damage can also irreversibly damage the control unit and impair its full functionality.
When an airbag is deployed, the control unit stores indelible crash data. This requires a reset or replacement. Internal memory errors or processor problems can also cause the control unit to fail.
External influences such as water ingress, short circuits in the wiring harness, or overvoltage can also cause permanent damage to the module. In such cases, repair is often not possible, and replacement is necessary to restore full safety.
Common Error Codes for Chevrolet Camaro SS 6th Gen Airbag Control Unit Repair
Common error codes that indicate a faulty Chevrolet Camaro SS 6th Gen airbag control module are specific B-codes, which indicate internal module problems or communication disruptions. These codes directly signal a malfunction of the control module itself, not of sensors or peripheral components of the airbag system.
- B1000 → Control unit communication error → The airbag ECU cannot communicate correctly with other systems.
- B1014 → Airbag control unit communication error → Specific error in the communication line of the airbag module.
- B1231 → Event threshold exceeded → The airbag control unit has detected a trigger threshold and may be blocked.
- B1239 → Airbag diagnostic sensor unit faulty → Internal diagnostic function of the module reports an error.
- B1499 → SRS-ECU detects airbag already deployed → The control unit is locked after deployment and must be repaired or replaced.
- 65535 → Internal Control Unit Memory Error → A problem with the internal memory of the airbag control unit.
- B1620 → Internal Error – Airbag Control Module Replacement Required → This code explicitly indicates that the module needs to be replaced.
What part numbers are available for the Chevrolet Camaro SS 6th Gen airbag control unit repair?
Two primary OEM part numbers are verified for the Chevrolet Camaro SS 6th Gen airbag control module: 13575447 and 13510817. These numbers correspond to original General Motors parts and are explicitly for the control module itself, not for sensors or other modules that are part of the system.
Part number 13575447 is confirmed as a genuine airbag control module for the Chevrolet Camaro 6th Gen. It is commonly offered for model years from 2010 onward (which includes the 6th Gen) and is verified by expert sources.
Part number 13510817 is also a verified OEM number for the Chevrolet Camaro airbag control module, specifically for the 2017-2018 model years. Both numbers are directly from General Motors and ensure compatibility as a genuine replacement part.
There are no other unique OEM part numbers from third-party manufacturers such as Bosch or Continental that are listed as direct replacement parts for this specific 6th Gen Camaro airbag control unit. When repairing or replacing your Chevrolet Camaro SS 6th Gen airbag control unit, you should refer to these numbers.
Function and technical specifications of the Chevrolet Camaro SS 6th Gen Airbag Control Module
The Chevrolet Camaro SS 6th Gen airbag control unit is responsible for controlling and monitoring all airbags and seatbelt pretensioners. It precisely processes sensor signals, features diagnostic functions, and stores error messages. For proper function, VIN-specific reprogramming after installation is essential.
The control unit is digital and receives signals from acceleration sensors, seat occupancy sensors, and other safety sensors. In the event of an accident, it analyzes these signals and synchronously activates the corresponding airbags and seatbelt pretensioners. The module's power supply is designed to remain stable for a short time, even during an impact.
The system continuously monitors its own integrity. System errors are indicated by the airbag warning light in the instrument cluster. A professional diagnostic tool can read crash data and error messages to enable a precise diagnosis during Chevrolet Camaro SS 6th Gen airbag control unit repair.
Compatibility and installation position of the Chevrolet Camaro SS 6th Gen Airbag Control Unit
The Chevrolet Camaro SS 6th Gen airbag control unit is compatible with 2016 and newer models, especially the SS trims (1SS and 2SS) with the 6.2L LT1 V8 engine. It is installed centrally in the vehicle, often in the center console or under a seat, and is connected via yellow-colored connectors.
This control unit is specifically designed for the 6th generation Chevrolet Camaro SS. It supports the standard equipment, including front, side, and knee airbags, as well as passenger seat occupancy detection. The exact equipment variant (1SS or 2SS) may cause minor differences in the control unit's functionality.
Installation is typically carried out in a protected location that is also optimal for recording crash events. Connections to the airbags, seatbelt pretensioners, and sensors are made via special connectors, usually marked yellow, that are protected against accidental activation.
Chevrolet Camaro SS 6th Gen Airbag Control Unit Repair: Service and Special Features
Repairing or replacing a Chevrolet Camaro SS 6th Gen airbag control unit requires professional expertise and equipment. In particular, after installation, VIN-specific reprogramming at a GM authorized repair shop is necessary to ensure full functionality and system integration and to avoid errors.
A defective module cannot simply be replaced with a used, unprogrammed part, as each control unit is linked to the vehicle identification number (VIN). A professional service center usually offers tested used modules, but these must be programmed before installation on your vehicle. This ensures that the airbag system functions properly after the repair.
The system is tested and certified to the highest safety standards. Improper repair of the Chevrolet Camaro SS 6th Gen airbag control unit can impair the function of the entire safety system and lead to serious risks. Therefore, diagnosis and replacement should always be performed by qualified personnel.