What is a Chevrolet Impala 7th Gen airbag control module?
The Chevrolet Impala 7th Gen airbag control unit is the central safety unit in your vehicle, activating all occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of an accident. It continuously monitors sensors, stores important crash data, and ensures the proper functioning of all airbag modules.
This module, also known as the Inflatable Restraint Sensing and Diagnostic Module (SDM), is the "brain" of your Chevrolet Impala's passive safety system. It collects impact data via sensors and decides in milliseconds whether to deploy the airbags.
A functioning airbag control unit is crucial for your safety and the safety of your passengers in the event of a collision. Regular inspection by a specialist workshop helps prevent failures.
Why is the Chevrolet Impala 7th Gen airbag control module defective?
The Chevrolet Impala 7th Gen airbag control module frequently fails because internal components fail after years of use or due to overvoltage, or because it stores crash data after an accident that requires a reboot or reprogramming. This then leads to error messages and the illumination of the airbag warning light.
Common causes of failure include internal hardware errors or problems with the module's power supply. A communication error with other control units in the vehicle can also cause the airbag system to stop functioning properly.
Incorrect or incomplete programming after a replacement or attempted repair can also signal a defect. Such errors prevent the system from functioning properly and require professional Chevrolet Impala 7th Gen airbag control unit repair.
Common Error Codes for Chevrolet Impala 7th Gen Airbag Control Unit Repair
During Chevrolet Impala 7th Gen airbag control module repairs, specific error codes occur that directly indicate problems with the control module itself, not with sensors or other airbag components. These codes help specialized repair shops quickly diagnose the exact cause of the failure.
- **B1000** → Internal module error → Cause: Defect in the airbag control unit (SDM) itself.
- **B1001** → Control unit calibration error → Cause: Faulty calibration or software of the module.
- **B1003** → Control unit communication error (CAN) → Cause: Problems with the data transmission between the airbag control unit and other systems in the vehicle.
- **B100A** → Control unit programming error (VIN, software) → Cause: Incorrect or incomplete programming, often after a module change or update.
- **B1015** → Control unit voltage error (internal/PCB) → Cause: Internal overvoltage or power supply problems on the control unit PCB.
What part numbers are available for the Chevrolet Impala 7th Gen airbag control unit repair?
For the Chevrolet Impala 7th Gen airbag control unit repair, several original GM part numbers are relevant, depending on the model year and specific vehicle configuration. These numbers are crucial for correctly identifying the required replacement or repair part.
The exact part number is marked on the control unit itself and should be used for precise identification. All modules must be reprogrammed to the vehicle's VIN after installation to function properly.
- **22816796** → GM (OEM) → Type: Original/SRS Airbag Control Unit; Fits Chevrolet Impala 2012-2016.
- **10305387** → GM (OEM) → Type: Original/SRS Airbag Control Unit; Fits Chevrolet Impala 2000-2004.
- **12204090** → GM (OEM) → Type: Alternative/replacement part (original GM); Fits Chevrolet Impala 7th generation (e.g. model years 2000–2004).
What does the Chevrolet Impala 7th Gen airbag control unit repair include?
Chevrolet Impala 7th Gen airbag control unit repair typically involves diagnosing the defect, correcting internal errors, or restoring the original functionality, followed by precise reprogramming to the vehicle identification number (VIN). This is the only way to ensure full operational reliability.
After an accident involving airbag deployment, the control unit stores crash data that causes a "hard lock." A simple reset is often not sufficient; the module must be repaired and recoded to extinguish the airbag warning light.
This safety-relevant work should only be performed by qualified specialists using special tools. A professional workshop ensures that your airbag system functions properly and safely again after the repair.