What is a Citroën Berlingo I airbag control unit?
The Citroën Berlingo I airbag control unit is your vehicle's central safety unit, responsible for monitoring and activating all occupant restraint systems. It receives signals from impact sensors, stores relevant crash data, and controls the deployment of airbags and seatbelt pretensioners to ensure maximum safety in the event of an accident and ensure reliable operation.
This module is an essential component in the passive safety system of the Citroën Berlingo I and Peugeot Partner I.
It is produced by the OEM manufacturer PSA and is adapted for specific model years and engines, such as diesel engines (e.g. WJY, 9HX).
Why is the Citroën Berlingo I airbag control unit defective?
A Citroën Berlingo I airbag control unit often fails due to its constant exposure to electronic stress, which leads to internal circuit failures. Typical causes include aging, overvoltage, or the storage of crash data after an accident, which requires a repair of the Citroën Berlingo I airbag control unit.
The control unit is under constant stress, which can affect its service life and lead to failure.
After an accident, crash data is permanently stored, rendering the control unit unusable until this data is professionally deleted.
Electronic failures can also occur due to corrosion at the connectors or internal component failure.
Common error codes for Citroën Berlingo I airbag control unit repair
Common error codes that indicate a necessary Citroën Berlingo I airbag control unit repair include communication errors such as F022 and B1000, which indicate a faulty connection to the control unit. Internal problems such as DTC0022, which signals a lack of power reserve, also indicate a defect in the airbag control unit.
These error codes can cause the airbag warning light in the instrument cluster to illuminate.
A correct diagnosis with PSA-specific diagnostic devices is essential for the successful Citroën Berlingo I airbag control unit repair.
- F022 → No communication with airbag ECU → Cause: cable break, control unit defective, voltage problem.
- B1000 → Control unit communication error → Cause: Internal electronic problems in the control unit, faulty CAN bus connection.
- DTC0022 → Energy reserve (internal) → Cause: Defect in the internal power supply or storage unit of the control unit.
What part numbers are available for Citroën Berlingo I airbag control unit repair?
For Citroën Berlingo I airbag control unit repairs, several original OEM part numbers exist to ensure the compatibility of the replacement part. These numbers have been verified by PSA (Citroën/Peugeot) as the manufacturer and are crucial for identifying the correct control unit for your vehicle and enabling a smooth replacement.
Using an exact part number ensures the full functionality of the airbag system.
All numbers listed here are original OEM parts that were installed in Citroën Berlingo I vehicles.
- 9638604280 (PSA/Original)
- 550897200 (PSA/Original, often as an alternative number to 9638604280)
- 6547WA (Citroën/Original)
- 9803916880 (PSA/Original)
- 9653190880 (PSA/Original)
- 9653190980 (PSA/Original)
Function and installation of the Citroën Berlingo I airbag control unit
The Citroën Berlingo I airbag control unit continuously receives signals from impact sensors and evaluates them in milliseconds to trigger the appropriate airbags and seatbelt pretensioners in the event of an accident. Its correct installation and connection via specific yellow connectors are crucial for the safety and functionality of the entire system.
The control unit is typically mounted in the center console area or behind the dashboard to protect it and ensure a central location for the sensor wires.
It is connected to all airbag modules and the belt tensioners via special cables to enable rapid response in an emergency.
After a successful Citroën Berlingo I airbag control unit repair or replacement, crash data often needs to be erased and the system reinitialized to restore full functionality.