What is a Daihatsu Hijet S200 airbag control unit?
The Daihatsu Hijet S200 airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It monitors sensors, stores crash data, and ensures the proper functioning of all airbag modules in the vehicle to ensure maximum safety in the event of a collision.
This module is crucial for the functionality of the passive safety system in your Daihatsu Hijet S200. It processes signals from various sensors to determine the severity of an impact.
In the event of an accident, it triggers the airbags and seat belt tensioners in milliseconds, thus effectively protecting the vehicle occupants.
Why is the Daihatsu Hijet S200 airbag control unit defective?
A Daihatsu Hijet S200 airbag control unit can be defective because it stores crash data after an accident and then blocks it. Internal hardware errors, overvoltage, or moisture can also lead to failure, requiring professional diagnosis and, if necessary, repair of the control unit.
The most common cause of a defect is a car accident, after which the control unit locks due to stored crash data and the airbag warning light remains permanently lit.
Other causes of failure can include internal component failure, age-related wear and tear, voltage fluctuations in the electrical system, or corrosion caused by water ingress. In such cases, a professional diagnosis and often a repair of the Daihatsu Hijet S200 airbag control unit is necessary.
Common error codes for Daihatsu Hijet S200 airbag control unit repair
Specific trouble codes for the Daihatsu Hijet S200 airbag control unit are not officially verified, but common OBD-II codes do occur, indicating problems with the airbag system. These can assist with diagnosis but often require manufacturer-specific tools to accurately identify the fault and the necessary repair.
If the airbag warning light comes on in the Daihatsu Hijet S200, these are some common, although not model-specific, error codes that could indicate a problem in the airbag control unit or its surroundings:
- B1000 → Control unit communication error → Problem in the data transmission of the airbag control unit.
- B0091 → Control unit (Airbag Control Module) error → Internal error in the airbag control unit itself.
- B0010 → Driver side airbag circuit error → Problem with the wiring or driver side airbag module.
- B0040 → Passenger airbag module error → Malfunction in the passenger airbag or its connection.
- B1801 → General Airbag Warning Light → This code is occasionally mentioned on Daihatsu Hijets in connection with airbag light problems, but is not officially assigned to an S200 control unit.
For a precise diagnosis and to carry out the Daihatsu Hijet S200 airbag control unit repair, the use of manufacturer-specific diagnostic tools is essential to determine the exact cause of the malfunction.
What part numbers are available for the Daihatsu Hijet S200 airbag control unit repair?
There are currently no 100% verified OEM part numbers for the Daihatsu Hijet S200 airbag control unit from independent, trusted sources. Although the number 89170-B5090 exists, its explicit assignment to the S200 model is not certain and should be verified during repair.
Searches for exact OEM part numbers for the Daihatsu Hijet S200 airbag control unit, confirmed by multiple sources, have shown that these are not publicly available or clearly verified.
The unverified number we have is 89170-B5090, which is listed as a genuine Daihatsu part, but without explicit confirmation for the S200 model or from major suppliers.
For a reliable Daihatsu Hijet S200 airbag control unit repair, we recommend contacting a Daihatsu dealer directly or querying professional parts catalogs using the chassis number to determine the correct part number and avoid failure.