What is a Daihatsu Sirion M300 airbag control unit?
The airbag control unit for the Daihatsu Sirion M300 is the central electronic unit that continuously monitors the vehicle's sensors and, in the event of an accident, deploys all occupant restraint systems, such as airbags and seatbelt pretensioners, as needed. It is crucial for safety and, if defective, requires a professional Daihatsu Sirion M300 airbag control unit repair.
This module forms the heart of the passive safety system and is responsible for the precise detection of impact events.
It stores important crash data and ensures that the airbag modules in the vehicle are always functional, which is essential for the safety of the occupants.
Why is the Daihatsu Sirion M300 airbag control unit defective?
A malfunction in the Daihatsu Sirion M300 airbag control unit often occurs after an accident, as it stores crash data, necessitating a reset or repair. Internal electronic errors, power surges, or age-related wear can also cause a failure, requiring immediate workshop diagnostics and a specialized Daihatsu Sirion M300 airbag control unit repair.
After a collision, the control unit stores indelible crash data that blocks its function and makes replacement or professional resetting unavoidable.
Internal components may fail due to aging or material fatigue, leading to sudden failure of the entire airbag system.
Faults in the wiring harness or connectors, often caused by moisture or mechanical stress, can also cause communication problems and simulate a defect.
Common error codes for Daihatsu Sirion M300 airbag control unit repair
If a Daihatsu Sirion M300 airbag control unit repair is necessary, specific error codes will appear that directly indicate problems with the airbag control system. These OBD-II B codes signal internal errors, communication problems, or a module malfunction that require precise diagnosis and expertise to resolve.
- **B1000** → Control unit communication error → Signal loss or internal fault of the communication unit.
- **B1015** → Faulty airbag control module → Internal defect or malfunction of the SRS control module itself.
- **B1139** → Error within the SRS control module → Generalized internal hardware or software error in the module.
- **B1190** → Airbag control unit error (SRS module, body harness problem) → Defect in the control unit or open circuit in the body wiring harness.
- **B1193** → Airbag module related error → General malfunction of the airbag module attributable to the control unit.
What part numbers are available for the Daihatsu Sirion M300 airbag control unit repair?
For Daihatsu Sirion M300 airbag control unit repairs, the precisely verified Daihatsu OEM part number 89170-B1190 is the primary reference for the airbag control unit. This number ensures 100% compatibility with the M300 model and is crucial for a successful repair or replacement.
The only confirmed OEM part number directly applicable to the M300 model is 89170-B1190.
No other clearly verified OEM or supplier part numbers (such as Bosch, Continental or Autoliv) could be identified for the airbag control unit of the Daihatsu Sirion M300.
Daihatsu Sirion M300 Airbag Control Unit Technical Specifications and Compatibility
The Daihatsu Sirion M300 airbag control unit, essential for Daihatsu Sirion M300 airbag control unit repair, is an OEM component, typically manufactured by Denso, and designed for 12V electrical systems. It is compatible with the 2005-2013 M3 series, including 1.0L and 1.3L gasoline engines such as the K3-VE, as well as front-wheel drive and optional all-wheel drive hatchback models.
The manufacturer of this control unit is Daihatsu as an OEM, although production is often carried out by the supplier Denso.
It is designed for an on-board voltage of 12 V and typically weighs about 1 kg.
The control unit is compatible with petrol engines, including the 1.3L K3-VE petrol engine with power outputs from 51 kW (70 hp) to 64 kW (87 hp).
Compatibility extends to front-wheel drive vehicle models and the 5-door hatchback body of the Sirion M300, including 4WD variants of the 1.3 liter engine.
It fits the 2nd generation (M3 series) from approximately 2005 to 2013 and supports standard driver and passenger airbags, side airbags and optional head airbags.
Functionality and special features of the Daihatsu Sirion M300 airbag control unit repair
The Daihatsu Sirion M300 airbag control unit's functionality is based on continuous monitoring of impact sensors and the deployment of airbags and seatbelt pretensioners as needed in the event of an accident. A special feature is its repairability after a crash or in the event of a failure, offering a more cost-effective alternative to purchasing a new unit and extending the vehicle's service life.
The control unit continuously monitors G-sensors and impact sensors to detect an accident safely and quickly.
In the event of an accident, it evaluates the signals and specifically triggers the front, side and head airbags as well as the belt tensioners to provide optimal protection for the occupants.
An integrated error code memory enables the diagnosis of system malfunctions via the OBD interface and activates the airbag warning light in the instrument cluster if problems occur.
The control unit has a backup power supply that ensures reliable airbag deployment even in the event of a voltage drop in the vehicle electrical system.
Often produced by Denso, specific software variants may exist for different engines (1.0L, 1.3L) and trim levels that must be taken into account during Daihatsu Sirion M300 airbag control unit repair.
The possibility of professional repair after accidental damage or an internal fault is an advantage as it restores the original functionality and saves costs compared to replacement.
Installation position and connections of the Daihatsu Sirion M300 airbag control unit
The Daihatsu Sirion M300 airbag control unit is typically located in the front footwell, under the dashboard on the driver's side, to ensure centralized connectivity to all relevant sensors and airbag modules. Its installation requires proper connection to multi-pin connectors for power supply, sensor signals, airbag squib wires, and communication buses.
The typical installation position of the control unit is in the front footwell, often under the center console or dashboard on the driver's side.
It is connected to the vehicle system via multi-pin connectors that provide power, sensor signals, igniter lines for airbags and seat belt pretensioners, and communication lines.
The wiring harness connects the control unit to the ignition switch circuit, the seat belt pretensioner ignition circuits, the airbag squibs and various sensors such as acceleration and pressure sensors.
For the driver's airbag, it is connected to the control unit via the slip ring in the steering column area, which must be taken into account when repairing the Daihatsu Sirion M300 airbag control unit.