Infiniti Q60 Convertible CV37 Airbag Control Unit Repair

What is an Infiniti Q60 Convertible CV37 airbag control module?

The Infiniti Q60 Convertible CV37 airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It continuously monitors sensors, stores relevant crash data, and ensures the proper functioning of all airbag modules and seatbelt pretensioners in the vehicle, which is essential for occupant safety.

This electronic control unit, also known as the SRS module, is primarily responsible for detecting collision situations. It processes sensory information about impact severity, seat occupancy, and the status of the seat belts.

The module is coded specifically for the vehicle and works closely with the vehicle identification number (VIN) to ensure seamless integration into the on-board network of the Infiniti Q60 Convertible CV37.

Why is the Infiniti Q60 Convertible CV37 airbag control unit defective?

The Infiniti Q60 Convertible CV37 airbag control module often fails because it stores crash data after an accident, triggering a fault condition and locking the system. Internal hardware errors or a faulty power supply can also cause a failure, requiring repair or reset of the module to restore full functionality of the safety system.

After airbag deployment, the module stores crash data that must be deleted. The repaired device is reset with all vehicle-specific data and is immediately functional after reinstallation.

Other causes of a defect can include internal memory corruption, software errors, or power supply problems. Age-related wear and tear or moisture ingress can also affect the control unit's electronics, necessitating a repair of the Infiniti Q60 Convertible CV37 airbag control unit.

Common error codes for Infiniti Q60 Convertible CV37 airbag control unit repair

During the Infiniti Q60 Convertible CV37 airbag control unit repair, specific error codes occur that indicate internal problems or communication issues within the module. These OBD-II B-codes signal malfunctions that directly affect the control unit and enable precise diagnosis for repair, which is critical for vehicle safety.

• B1000 → Control unit communication error → Error in the internal communication of the airbag control unit.
• B1001 → Internal memory error in the airbag module → Damage or corruption of the internal data of the control unit.
• B1002 → Airbag ignition circuit error → Problem with the control unit controlling the airbags.
• B1003 → Control unit power supply faulty → Inconsistent or intermittent power supply to the module.
• B1004 → EEPROM memory corrupted → Error in the non-volatile memory that holds important configuration data.
• B1005 → Power failure or open circuit in the airbag module → Sudden loss of supply voltage in the system.
• B1010 → Airbag sensor bus error → Communication fault between the control unit and its sensors.
• B1015 → Control unit self-test error → The module cannot check its own function correctly.
• B1020 → Communication error with other control units (CAN bus) → Data transmission fault in the vehicle network.
• B1025 → Faulty airbag activation outputs → The control unit cannot deploy the airbags correctly.

What part numbers are available for the Infiniti Q60 Convertible CV37 airbag control unit repair?

For the Infiniti Q60 Convertible CV37 airbag control unit repair, the part numbers 25348-5CA0B and 98820-1VZ0B are stored for this repair product. Both numbers belong to airbag control units of this model and help clearly assign the matching control unit to your repair.

Only these two part numbers are currently stored for this repair product. The number on the label of your control unit can be stated in the repair order.