What is a Lamborghini Huracán LP580-2 airbag control unit?
The Lamborghini Huracán LP580-2 airbag control unit is the central control unit of the passive safety system, which instantly activates all occupant restraint systems in the event of an accident. It continuously monitors sensors, stores important crash data, and is essential for the correct functioning of all airbag modules in the vehicle.
This SRS (Supplemental Restraint System) Airbag Control Module is crucial for the super sports car's passive safety. It processes signals from various vehicle motion sensors, including the Lamborghini Piattaforma Inerziale (LPI).
The control unit communicates in real time with other vehicle systems via the CAN bus to enable precise accident detection and response. After a necessary repair or reset, the module is often "plug and play"; sometimes calibration is necessary.
It is specifically designed for the Lamborghini Huracán LP580-2, built between approximately 2016 and 2019. Precise tuning to the driving dynamics of the rear-wheel drive model is of utmost importance.
Why is the Lamborghini Huracán LP580-2 airbag control unit defective?
The Lamborghini Huracán LP580-2 airbag control unit usually fails after an accident because it stores crash data that requires a reset, or fails due to internal errors such as voltage spikes or aging. Repairing the Lamborghini Huracán LP580-2 airbag control unit resolves such problems.
A common cause of a defect is the storage of crash data after an accident, which blocks the system and requires a reset by a specialized service. Such "hard codes" must be professionally erased.
Internal component failure, corrosion caused by moisture, or power supply issues can also lead to failure. In these cases, the vehicle typically displays a warning message in the instrument cluster.
A detailed diagnosis at a specialized workshop is essential to determine the exact cause and perform the appropriate repair for the Lamborghini Huracán LP580-2 airbag control unit. Often, a replacement can be avoided.
Common error codes for Lamborghini Huracán LP580-2 airbag control unit repair
During Lamborghini Huracán LP580-2 airbag control unit repairs, specific error codes are often read out, signaling direct problems with the control unit itself. These range from internal communication problems and memory defects to errors in the module's self-test, which require immediate diagnosis.
- B1000 : Control unit communication error → Indicates a disruption in the data transmission between the airbag control unit and other systems, often indicating wiring or internal electronic problems.
- B1001 : Airbag control unit internal error → Indicates a critical internal hardware or software defect that may render the module unusable.
- B1010 : Internal memory error → This code indicates problems with the control unit's non-volatile memory (EEPROM), which stores important configuration and crash data.
- B1100 : Internal UDS communication channel error → Affects the internal communication capability of the control unit itself and can significantly impair its function.
- B1420 : Airbag control unit self-test error → The control unit could not successfully complete its internal self-test, which suggests a general functional error.
- B1640 : Internal AD converter error → A defect in the analog-to-digital converter impairs the control unit's ability to correctly interpret sensor data.
- B1690 : Voltage supply error in the control unit → Signals problems with the electrical supply to the airbag control unit, such as undervoltage or overvoltage.
- B1790 : EEPROM read error in the control unit → Indicates that data from the internal memory cannot be read correctly, which seriously affects the functionality of the control unit.
These codes relate exclusively to the central control unit 4G0959655B and are often read using specific VAG diagnostic systems. Hard codes stored after a crash require a special reset service.
Correcting these errors is crucial to restoring the full functionality of the passive safety system. A professional diagnosis is the first step toward a successful repair.
What part numbers are available for the Lamborghini Huracán LP580-2 airbag control unit repair?
For the Lamborghini Huracán LP580-2 airbag control unit repair, the primary and 100% verified OEM part number is 4G0959655B. There are currently no other independent, verified OEM or supplier numbers explicitly associated with this central control unit.
The part number 4G0959655B is uniquely assigned to the SRS Airbag Control Module for the Lamborghini Huracán LP580-2. This number is listed as a genuine part by specialized suppliers.
It's important to note that many other numbers are in circulation, but they refer to airbag units in the steering wheel, side airbags, or separate sensors. These are not identical to the central control unit.
A careful check of the part number is crucial to ensure that the correct component is used for the planned Lamborghini Huracán LP580-2 airbag control unit repair.