What is a Mercedes-Benz S-Class W222 airbag control unit?
The Mercedes-Benz S-Class W222 airbag control unit is the central safety unit that activates all occupant restraint systems, such as airbags and seat belt pretensioners, within seconds in the event of an accident. It continuously monitors all associated sensors, stores important crash data for analysis, and ensures the correct functioning of all passive safety systems in your vehicle.
This essential component is responsible for the precise detection of an impact situation and the timely activation of the safety devices.
Proper functioning of the control unit is essential for your safety and compliance with legal requirements in road traffic.
Why is the Mercedes-Benz S-Class W222 airbag control unit defective?
A Mercedes-Benz S-Class W222 airbag control unit often fails due to internal electronic errors, overvoltage, or a crash, which impairs safety functionality and causes the airbag warning light to illuminate. Repairing the Mercedes-Benz S-Class W222 airbag control unit is essential to restore full functionality and avoid safety risks.
Common causes of failure include internal memory errors that can occur after an accident or general aging of the sensitive electronics.
Malfunctions in the vehicle electrical system, corrosion on the connections or water damage can also cause your airbag control unit to break down.
A defective control unit prevents the airbags from being deployed in an emergency and must be repaired or replaced immediately to ensure vehicle safety.
Common error codes for Mercedes-Benz S-Class W222 airbag control unit repair
During diagnostics for the Mercedes-Benz S-Class W222 airbag control unit repair, specific error codes may occur that indicate internal problems or communication issues within the control unit. These codes help identify the exact defect and prepare for a targeted repair or replacement to restore safety.
- B1000 : Control unit communication error → Signal transmission disrupted → Defect on the CAN bus or internally in the control unit.
- B1003 : Airbag control unit internal error → Internal system malfunction → Hardware or software problem in the control unit.
- B119C : Airbag control unit error (unspecified) → General system error → Internal defect, requires deeper diagnosis.
- B1600 : Airbag control unit error / SRS lamp on → warning lamp active → system error of the airbag module.
- B2D92 : Control unit defective → Critical hardware damage → Internal total damage of the component.
- AD67 : SRS control unit defective (internal error) → System failure → Unrecoverable internal error in the control unit.
- 9004 : Airbag control unit voltage too high → Excessive voltage supply → Problem with the vehicle electrical system or internal voltage regulator.
- U0511 : Communication error with airbag control unit (CAN bus) → Data flow interrupted → Connection problem to the control unit via the CAN bus.
What part numbers are available for the Mercedes-Benz S-Class W222 airbag control unit repair?
For Mercedes-Benz S-Class W222 airbag control unit repairs, several specific OEM part numbers are relevant to ensure exact compatibility with your vehicle model. These numbers identify the correct replacement part and are crucial for successfully repairing the safety features and preventing further problems.
- A2229000303 → Mercedes-Benz → Original airbag control unit for W222.
- A2229009908 → Mercedes-Benz → Original airbag control unit for W222.
- A2229024709 → Mercedes-Benz → Replacement or alternative part number for W222.
- A2229013503 → Mercedes-Benz → Alternative part number for W222.
- A2229012601 → Continental → OEM supplier part number, compatible with W222.
Which models are compatible with the Mercedes-Benz S-Class W222 airbag control unit repair?
The Mercedes-Benz S-Class W222 airbag control unit repair only applies to models of the S-Class W222 series from 2013 to 2020, including sedan, long-wheelbase, coupe, and convertible. The correct part number is crucial for precise compatibility and to fully restore the safety systems.
This control unit was specially developed for the model years 2013 to 2020 of the Mercedes-Benz S-Class W222.
This includes all body variants such as the sedan (W222), the long version (V222), the coupé (C217) and the convertible (A217).
Vehicles such as the S 500 4MATIC (222.085, 222.185) are typical examples that use these control units.
It is imperative to match the part number, as even within the W222 range, different equipment may require different control units.
Where can I get my Mercedes-Benz S-Class W222 airbag control unit repaired?
Your Mercedes-Benz S-Class W222 airbag control unit should only be repaired by qualified specialists or a specialized workshop with the necessary expertise and equipment. A professional repair is essential to restore the full functionality of this safety-relevant component and comply with legal regulations.
Due to the safety-critical nature of the airbag control unit, professional repair by certified technicians is essential.
Find a specialized workshop that has experience diagnosing and repairing Mercedes-Benz airbag systems.
These shops can also erase crash data and reprogram the control unit if necessary, which is a complex process.
We offer professional repair services for your defective Mercedes-Benz S-Class W222 airbag control unit, quickly and reliably.