What is a Mercedes-Benz Sprinter W907 airbag control unit?
The Mercedes-Benz Sprinter W907 airbag control unit is the central safety unit that precisely controls all occupant restraint systems, such as airbags and seat belt pretensioners, in the event of an accident. It records critical crash parameters, stores relevant accident data, and monitors the correct functioning of the entire safety system (SRS) in the vehicle.
It is an OEM component, primarily from Mercedes-Benz or Bosch, which is essential for occupant protection in the Sprinter W907.
The control unit communicates with other vehicle systems via the CAN bus and is accessible for diagnostics and programming, for example with tools such as CG100X.
Why is the Mercedes-Benz Sprinter W907 airbag control unit defective?
A Mercedes-Benz Sprinter W907 airbag control unit is often defective because it stores crash data after an accident that needs to be erased, or because internal communication errors occur that can impair system function. The defect usually results in the airbag warning light remaining permanently illuminated.
Because a permanent error memory is set after an accident, the crash data must be professionally erased from the EEPROM; otherwise, the airbag system remains inactive.
Internal control unit errors such as processor problems (RENESAS RH850) or problems with CAN bus communication can also lead to failure, which requires precise diagnosis.
Common error codes for Mercedes-Benz Sprinter W907 airbag control unit repair
During Mercedes-Benz Sprinter W907 airbag control unit repair, specific error codes may occur that indicate internal control unit problems or sensor-related malfunctions, but do not affect airbag or seatbelt pretensioner deployment. These codes require precise diagnosis to determine the cause.
- B1000 → Control unit communication error → Problems in the internal communication of the airbag control unit or faults on the CAN bus.
- 9013 → Driver seat belt lock switch open → The switch on the driver's seat belt is reported as open and the information is processed directly in the airbag control unit.
These error codes are often read using specialized diagnostic devices and can be reset after the repair and deletion of the crash data in order to restore the full functionality of the Mercedes-Benz Sprinter W907 airbag control unit repair.
What part numbers are available for the Mercedes-Benz Sprinter W907 airbag control unit repair?
For the Mercedes-Benz Sprinter W907 airbag control unit repair, there are several OEM part numbers from Mercedes-Benz and Bosch that ensure the compatibility and interchangeability of the module within the W907 series. These numbers are crucial for the correct procurement of replacement parts.
- A9079000304 → Mercedes-Benz → Original part number, primarily for W907/W910 (2018-2021).
- A9079017900 → Mercedes-Benz → Alternative original part number, compatible with W907.
- A9079020303 → Mercedes-Benz → Further alternative original part number for the W907 series.
- 0285015024 → Bosch → OEM secondary number, directly related to MB A9079000304.
- 0285011400 → Bosch → Compatible replacement number, often also relevant for W906/W907.
- 0285010349 → Bosch → Closely related spare part number for Sprinter airbag control units.
- 0285010033 → Bosch → Also a closely related Bosch number, also suitable for W906/W907.
These part numbers include the primary OEM references as well as important Bosch supplier numbers relevant for professional Mercedes-Benz Sprinter W907 airbag control unit repair.
When does a Mercedes-Benz Sprinter W907 airbag control unit need to be repaired or replaced?
A Mercedes-Benz Sprinter W907 airbag control unit must be repaired or replaced if the airbag warning light is permanently illuminated, crash data is stored in memory after an accident, or a diagnostic report displays internal error codes such as B1000 that prevent proper function. This is essential for occupant safety.
After an accident, repair of the Mercedes-Benz Sprinter W907 airbag control unit is often necessary because it stores crash data that prevents the system from being reset without professional intervention.
A replacement or repair is also essential in the event of unexplained system malfunctions, a permanently illuminated warning light, or problems with control unit communication.
Where can I get my Mercedes-Benz Sprinter W907 airbag control unit repaired?
You can have your Mercedes-Benz Sprinter W907 airbag control unit repaired at specialized workshops or providers with expertise in airbag control unit repair who have the necessary diagnostic and programming tools, such as the CG100X. These companies specialize in the restoration of safety-relevant components.
Providers like airbag24.de specialize in Mercedes-Benz Sprinter W907 airbag control unit repairs and can delete crash data or clone the control unit.
A professional repair ensures the restoration of full safety functionality and the correct deactivation of the airbag warning light after repair, often as a cost-effective alternative to a new part.