What is a Mitsubishi Pajero V90 airbag control unit?
The Mitsubishi Pajero V90 airbag control unit is the central safety unit that activates all occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of an accident. It continuously monitors sensors, stores relevant crash data, and ensures the safe and proper functioning of all airbag modules in the vehicle.
This electronic module is responsible for continuously monitoring the entire airbag system. It ensures that the passive safety systems are reliably deployed when necessary, thus effectively protecting occupants.
To do this, the control unit processes signals from acceleration sensors, also known as G-sensors, to precisely detect a collision. This data is crucial for the correct and timely activation of the protection systems.
The control unit communicates with vehicle diagnostic systems via standardized interfaces such as OBD-II. This enables quick fault diagnosis and the necessary system reset after the Mitsubishi Pajero V90 airbag control unit is deployed or repaired.
It is typically powered by the vehicle's 12V electrical system and is designed for extreme automotive temperature ranges from -40°C to +85°C. Its robust construction protects it from vibrations and environmental influences.
Why is the Mitsubishi Pajero V90 airbag control unit defective?
A Mitsubishi Pajero V90 airbag control unit can be defective due to internal memory errors, erroneous crash data being permanently stored, or CAN communication disruptions. This often results in a permanently illuminated SRS warning light and prevents the safety system from functioning properly in the event of an accident.
The most common reason an airbag control unit is broken or inactive is because it stores crash data after an accident. Even minor collisions can cause the module to become permanently disabled, necessitating repair.
Internal memory errors such as EEPROM defects (B1496) or ROM/RAM errors (B1498) can impair the functionality of the control unit. Such failures require specialized repairs for the Mitsubishi Pajero V90 airbag control unit.
Problems with CAN bus communication (B1548, B1549) or a defective connector lock (B1519) can also lead to failure. In such cases, the control unit can no longer send or receive data, making diagnosis difficult.
Common error codes for Mitsubishi Pajero V90 airbag control unit repair
When repairing a Mitsubishi Pajero V90 airbag control unit, specific error codes often arise that directly indicate problems within the control unit itself. These codes are crucial for a precise diagnosis and identifying the exact cause of the failure, allowing targeted corrective measures to be taken.
The following codes indicate internal defects or communication problems in the airbag control unit and require detailed investigation. They are associated exclusively with the control unit and not with other components.
- B1496 → SRS-ECU non-volatile memory (EEPROM) error → Defect in the control unit's EEPROM memory.
- B1497 → SRS-ECU Application Specific Integrated Circuit (front) → Internal hardware error in the control unit chip.
- B1498 → SRS-ECU ROM or RAM error → Problems with the internal memory (ROM/RAM) of the module.
- B1499 → Collision decision (crash detection in the control unit) → The control unit has detected a crash and is locked.
- B1509 → Wrong SRS-ECU module detected → Incompatible or incorrectly coded control unit installed.
- B1519 → SRS-ECU connector lock defective → Physical defect in the control unit connector.
- B1547 → Passenger airbag deactivation → Control unit detects an error when deactivating the passenger airbag.
- B1548 → CAN communication impossible → Serious disruption of the data connection to the control unit.
- B1549 → CAN communication error → General problems with the module's CAN bus communication.
What part numbers are available for the Mitsubishi Pajero V90 airbag control unit repair?
When repairing or replacing a Mitsubishi Pajero V90 airbag control unit, certain OEM part numbers are critical to ensure compatibility and safety. Using the correct part number is essential to ensure the full functionality of the vehicle's safety system.
Verifying the part number is crucial to ensure that the replacement or repair module is an exact fit for the vehicle. This prevents incompatibilities and ensures proper function after repair.
- 8635A457 (Mitsubishi Genuine) – Often listed as an OEM module for Pajero V90 airbag control units.
- 3SR791 (Supplier / OEM Reference) – A confirmed supplier part number relevant to the repair of the airbag module.
- W2T92571-25640 (Mitsubishi Genuine) – Another OEM reference number directly from Mitsubishi.
- 153000313 (Mitsubishi Genuine) – Explicitly listed in the Mitsubishi parts catalog for Pajero.
- MB942715 (Mitsubishi Original) – An alternative number to 153000313, also for Pajero.
- 7420A082 (Mitsubishi Genuine) – Relevant for Pajero IV V80 and V90 airbag control units.
- 7407A095 (Mitsubishi Genuine) – An additional OEM number for the airbag control unit.
- 5757A026 (Mitsubishi Genuine) – Another valid OEM number for the airbag control unit.