What is a Nissan NV200 M20 airbag control unit?
The Nissan NV200 M20 airbag control unit is the brain of your safety system, instantly deploying airbags and seatbelt pretensioners to protect occupants in the event of an accident. It continuously monitors all sensors, stores important crash data, and is essential for the proper functioning of your vehicle's passive safety features.
This module, also known as the SRS Airbag Control Module, is specifically designed for the Nissan NV200 van with the M20 engine code. It coordinates the deployment of the Supplemental Restraint System (SRS), which includes front, side, and curtain airbags.
The component is suitable for Nissan NV200 vehicles from approximately 2010 onwards with the 1.5 dCi M20 engine. Variants such as the M20N and M20M use similar, compatible control units.
Why is the Nissan NV200 M20 airbag control unit defective?
A defective Nissan NV200 M20 airbag control unit can occur if internal components are damaged by moisture or software corruption. As a safety-critical unit, it is constantly exposed. This can cause the airbag system to fail completely, signaled by an illuminated warning light in the instrument cluster.
Common causes include internal hardware errors or corrupted software within the module itself. Water ingress or power surges can also irreparably damage the sensitive electronics and destroy the module.
After an accident, the control unit stores crash data that can prevent further use, even if the module itself is undamaged. A professional reset is then essential to restore full functionality and resolve the failure.
Common error codes for Nissan NV200 M20 airbag control unit repair
During a Nissan NV200 M20 airbag control unit repair, specific error codes are often read out, indicating internal problems or communication issues within the module. These DTCs are crucial for a precise diagnosis to identify the cause of the malfunction and restore the system to safety.
- B1000 → Control unit communication error → Internal ECU malfunction or data bus problems
- B1120 → Left Airbag Sensor Error (Diagnostic Sensor Unit) → Defect in the Diagnostic Sensor Unit, affects ECU status
- Internal error (no exact code) → Hardware or software error in the airbag control unit → Moisture damage or software corruption in the module
These error codes are directly related to the control unit and are not purely sensor errors from seat belt pretensioners or seat occupancy mats. For a precise diagnosis, an OEM diagnostic tool such as Nissan CONSULT is recommended.
What part numbers are available for the Nissan NV200 M20 airbag control unit repair?
For a successful Nissan NV200 M20 airbag control unit repair, exact OEM part numbers are essential, as airbag control units are programmed specifically for each vehicle. Only the correct numbers ensure full compatibility and functionality of the safety-relevant system in your van.
The following original part numbers are proven to be compatible and tested for the Nissan NV200 M20 airbag control unit. They are sourced from professional spare parts databases and OEM sources.
Part number 98820-1PD0B , often from Nissan/Autoliv, is a proven OEM part. This module is also offered as a "good tested used" part with a warranty, confirming its reliability and simplifying repair.
Likewise, part number 285563LS0E is a genuine OEM control unit from Nissan. It is listed on professional platforms as compatible with NV200/Evalia with the M20 engine code.
Important information about Nissan NV200 M20 airbag control unit repair and installation
Nissan NV200 M20 airbag control unit repair requires specialized knowledge and often requires modification to the vehicle, as these modules are programmed specifically for the vehicle. Improper installation or missing programming can impair the function of the entire airbag system and endanger your safety.
Even if the correct part number is available, reprogramming or adjustment at a Nissan dealer is often necessary. This ensures that the module communicates perfectly with the vehicle's electronics and is error-free.
After an airbag deployment, the module can be professionally reset (Crash Data Reset). This is a cost-effective alternative to purchasing a new module, as in 99% of cases, no further programming is required if the repair is performed by an experienced technician.
The control unit is located inside the vehicle under the center console, firmly bolted to the floor. Removal requires disassembly of the seat and console components, which should be performed carefully by a specialist workshop to avoid damage.