What is a Nissan Xterra N50 airbag control unit?
The Nissan Xterra N50 airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It continuously monitors sensors, stores relevant crash data, and ensures the proper functioning of all airbag modules in the vehicle. Repairing this module is essential for safety.
This vital control unit, also known as the SRS module, coordinates the deployment of airbags and seatbelt pretensioners in milliseconds. It processes signals from impact sensors throughout the vehicle and decides whether to activate the passive safety systems.
Why is the Nissan Xterra N50 airbag control unit defective?
The Nissan Xterra N50 airbag control unit can fail because it stores crash data after an accident, requiring a reset, or it can become damaged due to overvoltage, aging, or internal hardware failure. A failure will disable the airbag function, making professional repair or replacement crucial.
A common cause of a defect is the storage of collision data after an accident. These "hard codes" prevent the airbag system from reactivating, even if the vehicle has been repaired. The module must then be reset or replaced.
Electrical problems such as short circuits or voltage spikes can also damage the control unit. This often leads to internal errors that require proper diagnosis and repair of the unit. A workshop can assist with this.
Common error codes for Nissan Xterra N50 airbag control unit repair
Common error codes that indicate a Nissan Xterra N50 airbag control module repair are B1000 for communication errors and B1033-B1035 after crash data storage. B1425, B1427-55, and B14XX also indicate problems that require a reset or repair of the module. A precise diagnosis is essential.
- B1000 → Control unit communication error → Signal loss or internal malfunction of the ECU.
- B1033, B1034, B1035 → Airbag control unit error (crash data saved) → Module blocked after collision.
- B1425 → Rear collision detected → Requires special reset of the airbag control unit.
- B1427-55 → Airbag control module was replaced and not configured → Module requires programming to VIN.
- B14XX → Airbag control unit defective → Internal error or damage to the control unit.
What part numbers are available for the Nissan Xterra N50 airbag control unit repair?
For Nissan Xterra N50 airbag control unit repairs, specific OEM part numbers are essential to ensure compatibility. Verified numbers such as 98820ZP31A, 28556EC00B, and 98820AV200/98820AV21A are valid for the Xterra N50 and ensure the exact fit. These numbers are crucial for a successful repair.
When purchasing a replacement or repair module for your Nissan Xterra N50 airbag control unit, please use only the following OEM part numbers. These are 100% verified and guaranteed to function correctly.
The exact OEM part numbers for the Nissan Xterra N50 airbag control module are: 98820ZP31A, 28556EC00B, 98820AV200, and 98820AV21A. Make sure your replacement module has one of these numbers.
After installation, it is often necessary to program the module to the specific vehicle identification number (VIN) of your Xterra N50. This ensures full compatibility and system functionality. Consult a specialized service provider or workshop for this.