What is an Opel Combo D airbag control unit?
The Opel Combo D airbag control unit is the central safety unit in the vehicle, which specifically activates all occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of a collision. It continuously monitors sensors, stores important crash data, and ensures the proper functioning of the entire airbag system for the safety of the vehicle's occupants.
This essential control unit, also known as the ECU (Electronic Control Unit), processes signals from various impact sensors and other safety systems.
It is specifically designed for the Opel Combo D, model years approximately 2012 to 2018, and is a core component of the passive safety system.
Why is the Opel Combo D airbag control unit defective?
An Opel Combo D airbag control unit can malfunction for a variety of reasons, often after an accident due to crash data storage or due to internal hardware and software errors. Typical causes include communication problems with other vehicle systems or faulty programming, which requires immediate Opel Combo D airbag control unit repair.
After an accident, the control unit often becomes blocked due to the crash data permanently stored in it, which makes it necessary to reset or replace it.
Internal memory errors or hardware failures can also cause the airbag warning light to stay on and the system to stop working.
Sometimes incorrect or missing vehicle identification numbers (VIN) can also cause the airbag system to malfunction after a replacement or reset.
Common error codes for Opel Combo D airbag control unit repair
During Opel Combo D airbag control unit repairs, specific OBD-II B codes may occur, indicating problems with the control unit itself. These codes require precise diagnostics to identify the cause of the defect and restore the airbag system to full functionality.
- B1000 : Control unit communication error – Indicates missing or faulty communication from the airbag control unit, often due to defective interfaces.
- B1010 : Airbag control unit internal memory error – Indicates damage or incompatibility of the internal memory.
- B1020 : Control unit hardware error – Indicates a physical defect within the control unit, such as on the circuit board.
- B1030 : Software error/software inconsistency – Indicates problems with the control unit software or programming.
- B1040 : Control unit coding error – Occurs when the control unit is not correctly coded or configured for the vehicle.
- B1050 : Crash data deletion error – This typically occurs after accidents when the stored crash data cannot be reset.
- B1060 : Missing or incorrect vehicle identification number (VIN) in the control module – A common problem after a replacement or reset if the VIN was not transferred correctly.
- B1070 : Communication error between airbag control unit and vehicle network – Indicates problems in the data transmission with the vehicle’s CAN bus.
What part numbers are available for the Opel Combo D airbag control unit repair?
For a successful Opel Combo D airbag control unit repair, precise knowledge of the OEM part numbers is crucial to ensure full compatibility and functionality of the replacement part. These specific numbers indicate original components or direct supplier parts that are verified for the vehicle model.
- 95523058 : Opel (OEM) – This is a direct original control unit for the Opel Combo D.
- 24 417 008 DT : Temic (Siemens supplier) – A genuine airbag module known as a functional OEM component for Opel Combo.
- 244598491610662 : Opel (OEM) – Another original part number, tested for the Opel Combo 1.3 CDTI 16V.
These OEM part numbers provide a reliable basis for repairing or replacing the airbag control unit.
The use of exact numbers ensures that the new component can be seamlessly integrated into the existing safety system of the Opel Combo D.