What is a Peugeot 408 II airbag control unit?
The Peugeot 408 II airbag control unit is the central safety unit that instantly activates all occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of an accident. It continuously monitors sensors, stores relevant crash data, and ensures the proper functioning of all airbag modules for maximum occupant safety.
As the heart of the passive safety system, the control unit (SRS ECU) processes signals from various sensors to accurately detect a collision. It acts as the brain, coordinating and controlling the activation of the protective mechanisms.
In addition to the front airbags for the driver and front passenger, the system also controls side and curtain airbags to ensure comprehensive protection. Communication with other vehicle systems takes place via the CAN bus.
Why is the Peugeot 408 II airbag control unit defective?
A Peugeot 408 II airbag control unit often fails because it stores crash data after an accident, requiring reprogramming. Internal malfunctions, overvoltage, or moisture can also cause a failure, causing the airbag warning light to stay lit and the system to lose its protective function.
The most common cause of a defect is the storage of crash data after an accident, even in minor impacts. This blocks the system and requires professional repair or a reset of the control unit.
Internal electronic components can fail due to age or faulty power supplies. Water ingress or improper repair attempts can also damage the sensitive module.
A malfunctioning airbag control unit deactivates the entire SRS system, which poses a significant safety risk. The airbag warning light in the cockpit reliably indicates such a fault, which requires expert diagnosis and subsequent repair at a workshop.
Common error codes for Peugeot 408 II airbag control unit repair
During Peugeot 408 II airbag control unit repairs, specific error codes often occur that indicate problems directly within the control unit. These B-codes in the OBD-II system signal communication problems, internal module errors, or stored crash data and are crucial for a precise diagnosis of the fault.
- B1000 → Control unit communication error → Signals faults in the data connection of the airbag ECU.
- B1015 → Faulty control unit module → Indicates internal defects or software errors in the airbag control unit.
- B1139 → SRS module error → Describes a general error within the safety restraint system.
- B1193 → Airbag module related error → Indicates an error specifically in the airbag control module.
- B1206 → Airbag RCM Error → Indicates problems with the restraint control module (RCM).
- B1342 → SRS system failure → Indicates a comprehensive failure in the entire SRS system.
- B1620 → SRS Error → Another generic code for a malfunction of the SRS system.
- B1649 → Accident detected, crash data saved → Indicates that the control unit has registered an impact and saved data.
What part numbers are available for the Peugeot 408 II airbag control unit repair?
For Peugeot 408 II airbag control unit repairs, exact OEM part numbers are crucial to ensure compatibility and safety. Verified numbers from Peugeot and suppliers such as Autoliv/ZF are available for the SUV model from 2022 onwards and must be verified before repair or replacement.
Correctly identifying the part number is essential, as airbag control units are model-specific, and an incorrect part poses serious safety risks. Our research confirms several OEM numbers that you can use for your diagnosis and repair.
- 98 000 993 80 (Peugeot Original)
- 620 26 08 00 (Peugeot Original)
- 95320 (Peugeot Original)
- 96 64 05 87 80 (Autoliv / ZF Original)
- 96 54 71 72 80 (Autoliv / ZF alternative number)
These numbers ensure that the control unit is a perfect fit for the vehicle electronics of the Peugeot 408 II. A careful check of the part number is essential before any planned repair or replacement.