What is a Peugeot 508 I airbag control unit?
The Peugeot 508 I airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It continuously monitors sensors, stores relevant crash data, and ensures the immediate deployment of airbags and seatbelt pretensioners to guarantee the safety of the vehicle's occupants.
The control unit, often installed centrally in the vehicle, receives signals from acceleration and impact sensors. It is connected to all airbag modules and other safety systems via special yellow airbag connectors.
A permanent power supply from the vehicle battery is essential for operational readiness. Every time the vehicle is started, the module performs a self-diagnostic test, the results of which are displayed via a warning light in the instrument cluster.
Why is the Peugeot 508 I airbag control unit defective?
The Peugeot 508 I airbag control unit may be defective because it stores crash data after an accident, requiring reprogramming, or because internal components fail due to overvoltage or aging. A defect can also occur due to faulty communication with other vehicle systems, which can no longer guarantee safe operation.
For example, if the airbag control module hasn't been properly reset after a collision, the airbag warning light will remain active, signaling a fault. This often requires professional repair or replacement of the module.
Age-related wear and tear on the electronics or water damage can also cause a failure, making a Peugeot 508 I airbag control unit repair unavoidable. In such cases, a precise diagnosis is essential to identify the cause of the problem.
Communication errors (e.g., U1726) or faulty internal configurations (B1003, B1401) are also indicators of a faulty control unit. Timely diagnosis and repair are crucial for vehicle safety.
Common error codes for Peugeot 508 I airbag control unit repair
During Peugeot 508 I airbag control unit repairs, specific error codes often occur, indicating problems with control unit communication or internal configurations. These codes signal that the module is unable to properly perform its primary safety functions, requiring immediate diagnosis and repair.
- B1000: Control unit communication error → Signals → A communication malfunction of the airbag ECU.
- B1003: Secure Configuration Fault → Indicates → A faulty security configuration in the control unit.
- B1401: Steering Type Configuration Fault → Indicates → An incorrect steering wheel type configuration.
- U1F00: Error not registered in BSI → Indicates → An internal control unit fault without BSI registration.
- U1726: No communication with control unit → Means → A complete communication failure of the airbag ECU.
What part numbers are available for the Peugeot 508 I airbag control unit repair?
For a successful Peugeot 508 I airbag control unit repair, several OEM part numbers are relevant to ensure the replacement module's compatibility with the vehicle. These numbers, including those from Peugeot itself and supplier Valeo, are crucial for the correct function of the airbag system after replacement or repair.
- 9678656380 (Peugeot OEM): The primary original part number for the airbag control unit of the Peugeot 508 I.
- A2C53323336 (Valeo OEM): An alternative original part number from supplier Valeo, compatible with the Peugeot 508 I airbag control unit.
- P14750706 (Peugeot OEM): Another specific original part number for the airbag control unit of the Peugeot 508 I.
- 96 786 563 80 (Peugeot OEM): This number is often mentioned in connection with the reset of the airbag module for the Peugeot 508 I.
The correct functioning of the Peugeot 508 I airbag control unit is crucial for your safety. If there are signs of a defect or after an accident, a professional Peugeot 508 I airbag control unit repair is essential to restore the system to full functionality. Do not hesitate to visit a specialist workshop for a precise diagnosis and professional repair.