What is a Peugeot 806 I airbag control unit?
The Peugeot 806 I airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It precisely monitors sensor signals, stores important crash data, and ensures the proper functioning of all airbag modules in the vehicle, which is essential for your safety.
This module is the brain of the passive safety system in your Peugeot 806 I. It continuously receives data from the crash sensors to react instantly in the event of an impact.
Proper functioning is crucial for airbags and seatbelt pretensioners to deploy reliably in an emergency. A necessary Peugeot 806 I airbag control unit repair will restore full functionality.
Why is the Peugeot 806 I airbag control unit defective?
The Peugeot 806 I airbag control unit is often defective because it reacts sensitively to overvoltages or internal component faults that impair its function. Saving crash data after an accident also leads to blockages, requiring a Peugeot 806 I airbag control unit repair to clear error messages.
Common causes of failure include internal short circuits or damage caused by faulty power supplies. This can disrupt the control unit's communication with other vehicle systems.
Another reason is the airbags being deployed after an accident, which disables the control unit. In many cases, a professional repair can prevent the expensive purchase of a new unit and restore the defective unit.
Common error codes for Peugeot 806 I airbag control unit repair
When repairing a Peugeot 806 I airbag control unit, workshops often encounter specific error codes that indicate internal defects or communication problems. These codes signal that the control unit itself is the cause of the malfunction and require immediate repair.
- B1000 → Control unit communication error → Communication between the airbag control unit and diagnostic devices is disrupted.
- 65535 → Control unit defective / Internal error → Internal defect or non-functioning of the airbag control unit.
- 93F9 → Internal error (e.g. overvoltage damage) → Overvoltage or other electrical defects in the control unit.
- CAN error → No communication with airbag control unit (CAN bus error) → Missing CAN bus communication between the control unit and the vehicle.
What part numbers are available for the Peugeot 806 I airbag control unit repair?
For a successful Peugeot 806 I airbag control unit repair, knowing the exact part number is crucial, as only precisely matching modules guarantee full functionality. Several OEM part numbers are verified for the Peugeot 806 I, ensuring compatibility and avoiding errors.
The compatibility of the airbag control unit with your Peugeot 806 I depends on the specific OEM part numbers. These numbers help identify the correct replacement part.
The following original part numbers have been verified for the Peugeot 806 I airbag control unit and are crucial for precise diagnosis and repair:
- 1481000080 (Autoliv, original)
- 550539800 (Autoliv, Original)
- 1486142080 (PSA OEM, original)
- 550777700 (PSA OEM, Original)
- 14 956 580 80 (Temic, original)
Technical details and compatibility of the Peugeot 806 I airbag control unit
The Peugeot 806 I airbag control unit is a highly complex unit, specifically designed for models from 1994 to 2002, and is connected to multiple crash sensors. Its repair requires special diagnostic tools because it is tied to the vehicle and stores crash data that must be erased.
This control unit is the heart of the occupant protection system in the Peugeot 806 I, built approximately from 1994 to 2002. It is designed for various engines, including the 2.0 HDi diesel.
It is responsible for the precise control of airbag deployment and seat belt pretensioners in the event of an accident. Continuous system diagnostics ensure maximum safety.
Function and installation of the Peugeot 806 I airbag control unit
The Peugeot 806 I airbag control unit's function includes real-time crash data capture and millisecond-fast activation of the restraint systems. For a successful repair, it often has to be removed from the center console, as it is connected to the vehicle via a multi-plug connector.
The control unit continuously collects acceleration values via connected sensors. When critical values are detected, it makes lightning-fast decisions about activating front, side, and head airbags, as well as belt pretensioners.
In the event of a malfunction, the airbag warning light in the dashboard is activated. Diagnostics via the OBD interface allows relevant error codes to be read and the necessary repairs to be initiated.
The installation position is typically in the interior, often below the dashboard or in the center console of the Peugeot 806 I. Removal requires the dismantling of trim parts.
Special features and repairability of the airbag control unit
The Peugeot 806 I's airbag control unit is tied to the vehicle's system and stores crash histories, making replacement difficult. However, a professional Peugeot 806 I airbag control unit repair can erase the stored data and restore the original programming, restoring the system to full functionality.
After an accident or an internal defect, the airbag warning light indicates a malfunction. This must be repaired by a specialist workshop using specialized diagnostic and programming equipment.
A special feature is the so-called "system marriage," which requires reprogramming after a replacement or extensive repair. This ensures that the control unit harmonizes optimally with the vehicle.
Repairing the module is often a cost-effective alternative to buying a new one, especially if the problem is purely a crash record error. Specialized services offer a module reset, which reduces the workload for the repair shop.