What is a Daihatsu Hijet S200 airbag control unit?
The Daihatsu Hijet S200 airbag control unit is the central safety unit in your vehicle, activating all occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of an accident. It continuously monitors sensors, stores relevant crash data, and ensures the proper functioning of all airbag components at all times for your safety.
This electronic control unit (ECU) is crucial for the passive safety of the Daihatsu Hijet S200 and analyzes real-time data from acceleration and crash sensors. It decides within milliseconds whether airbag deployment is necessary to protect occupants.
It's a robust, vibration- and temperature-resistant module that's installed inside the vehicle and transmits diagnostic data via communication interfaces. A professional Daihatsu Hijet S200 airbag control unit repair will restore full functionality.
Why is the Daihatsu Hijet S200 airbag control unit defective?
The Daihatsu Hijet S200 airbag control unit often fails because it stores crash data after an impact, develops internal circuit faults, or experiences communication problems that impair safety functions. These defects cause the airbag warning light to activate and prevent proper system function, requiring specialized repair.
Internal errors or short circuits within the control unit are typical causes that necessitate repair. An accident can also irreparably damage the control unit or store crash data that requires a reset.
Communication problems with other vehicle systems or sensors can also cause the airbag control unit to report a fault. A precise diagnosis is essential for any Daihatsu Hijet S200 airbag control unit repair to identify the exact failure.
Common error codes for Daihatsu Hijet S200 airbag control unit repair
During a Daihatsu Hijet S200 airbag control unit repair, error codes B1000 and B1801 typically occur, indicating internal problems or communication errors within the control unit. These codes are critical for diagnosis and usually require a specialized reset or repair of the airbag ECU to clear the warning light and restore safety.
- B1000 → Control unit communication error → Interruption in data transmission or internal control unit error.
- B1801 → Airbag ECU RPM related error → Problems in the airbag control unit, often related to engine speed signals or internal defects.
These control unit-specific error codes indicate a malfunction within the airbag ECU and are not attributable to external sensors or seatbelt pretensioners. A precise error analysis is essential for any effective Daihatsu Hijet S200 airbag control unit repair.
Ignoring these error codes can impair the function of the airbag system in an emergency, which is why immediate action and professional workshop diagnosis are strongly recommended to avoid failure.
What part numbers are available for the Daihatsu Hijet S200 airbag control unit repair?
For the Daihatsu Hijet S200 airbag control unit repair, two exact OEM part numbers are primarily relevant and verified: the original Daihatsu number 89170-B5090 and the corresponding Bosch OEM supplier number 0 285 012 587. Other alternative or replacement part numbers from other manufacturers could not be clearly identified for this specific model, which simplifies the search for suitable replacement parts.
- 89170-B5090 → Genuine Daihatsu Part Number → Specifically listed for the Hijet S200 airbag control unit.
- 0 285 012 587 → Bosch OEM supplier part number → Identifies the Bosch module within the Daihatsu system.
These numbers are crucial for identifying the correct airbag control unit for your vehicle and performing a precise Daihatsu Hijet S200 airbag control unit repair. They ensure compatibility and system integrity.
Since no other exact spare part numbers are available, using these OEM designations is essential when purchasing components or requesting service. This will help you avoid incorrect purchases and ensure the safety of your vehicle in your workshop.