What is a Dodge Omni 2nd Gen airbag control module?
The Dodge Omni 2nd Gen airbag control unit is the central safety unit that activates all occupant restraint systems in the event of a crash. It continuously monitors sensors, stores relevant crash data, and ensures the proper functioning of all airbag modules and seatbelt pretensioners in the vehicle to provide maximum occupant safety.
This safety-relevant electronic module is also known as the airbag controller or SRS control unit.
It plays a crucial role in detecting collisions and triggering pyrotechnic protection systems in a flash.
Why is the Dodge Omni 2nd Gen airbag control module defective?
A Dodge Omni 2nd Gen airbag control module can malfunction because it stores crash data during an accident and locks up, requiring repair or a reset of the unit. Defects can also be caused by electrical surges, water damage, internal component failure, or age-related fatigue, which impair functionality and necessitate a Dodge Omni 2nd Gen airbag control module repair.
Because the control unit's internal memory stores "crash data" in the event of an accident, it must be reset afterwards, otherwise it will not allow further airbag deployment.
A failure can also be indicated by a permanently illuminated airbag warning light in the instrument cluster, even without a previous accident.
Electrical problems such as short circuits or poor ground connections can also damage the control unit.
Common error codes for Dodge Omni 2nd Gen airbag control unit repair
Dodge Omni 2nd Gen airbag control module repairs often diagnose non-specific trouble codes, as model-specific lists are rare. Typical B-codes indicate communication problems, malfunctions in the airbag deployment circuits, or open wiring, requiring precise diagnosis and repair of the airbag systems.
- B1000 → Control unit communication error → Malfunction in data transmission between ECU and other modules or internal defect.
- B000113 → Driver airbag squib 1 error → Problem in the driver airbag ignition circuit, often caused by a broken cable or a defective squib.
- B000213 → Driver Airbag Squib 2 Error → Defect in the second driver airbag squib circuit, indicates a wiring or component problem.
- B000313 → Driver Airbag Squib 3 Error → Error in the third firing circuit of the driver airbag, can be caused by a faulty connection or the airbag itself.
- B1B02 → Driver airbag squib 1 circuit open → Open circuit in the wiring to the driver airbag, preventing deployment.
These codes are general for Dodge airbag systems, but are not exclusively verified for the Dodge Omni 2nd Gen, as specific data for this older model is limited.
For an accurate diagnosis of your Dodge Omni 2nd Gen, the use of a specialized diagnostic device is recommended to clearly identify the source of the error and successfully carry out the airbag control unit repair.
What part numbers are available for the Dodge Omni 2nd Gen airbag control unit repair?
For the Dodge Omni 2nd Gen airbag control unit repair, no exact, 100% verified OEM part numbers specifically for the airbag control unit could be found from the available sources. The research results only list part numbers for airbag modules or horn pads, which do not represent the control unit itself and are therefore unsuitable for direct replacement of the airbag control unit.
Finding the correct part number for the Dodge Omni 2nd Gen airbag control module is difficult due to the age of the vehicle and the availability of information.
Often, such information is only available through specialized Mopar databases or direct inquiries to OEM dealers.
The following numbers were found, but refer to airbag modules and not to the control unit:
- AK86JS8 → Dodge/Mopar → Original Airbag & Horn Pad Module (Gray) → Not airbag control units, but airbag components.
- AK86JC5 → Dodge/Mopar → Original airbag sports airbag module (gray) → Also no control units.
To accurately identify the correct part number for your Dodge Omni 2nd Gen airbag control unit repair, it is advisable to use your vehicle's vehicle identification number (VIN) and contact a dealer or specialized remanufacturer.
To ensure the safety and functionality of the airbag system, avoid aftermarket parts without OEM reference.