What is a Pontiac Aztek 2001-2005 airbag control module?
The Pontiac Aztek 2001-2005 airbag control unit is the central safety unit that detects accidents and deploys all occupant restraint systems, such as airbags and seatbelt pretensioners. It continuously monitors vehicle sensors, stores relevant crash data, and ensures the proper functioning of the entire SRS system for maximum safety.
This module, also called SRS SDM (Supplemental Restraint System Sensing Diagnostic Module), is crucial for the safety of vehicle occupants.
It serves as the brain of the airbag system and must be repaired or replaced if it fails.
Correct functioning is essential to activate the protective systems in the event of an impact and to minimize injuries.
Why is the Pontiac Aztek 2001-2005 airbag control module defective?
A 2001-2005 Pontiac Aztek airbag control unit often malfunctions after an accident because it stores crash data that requires a reset. Internal electronic errors, power supply issues, or sensor-related failures can also cause malfunctions, necessitating a 2001-2005 Pontiac Aztek airbag control unit repair.
After an impact, so-called "hard codes" or crash data are stored in the control unit, preventing reprogramming.
Sometimes there is an internal error in the module that affects communication or functionality.
Inadequate power supply or damaged wiring can also cause the control unit to fail.
An illuminated airbag warning light in the dashboard is a clear indication of a defect that requires professional diagnosis and a Pontiac Aztek 2001-2005 airbag control unit repair.
Common error codes for Pontiac Aztek 2001-2005 airbag control unit repair
There are no specific, publicly documented OEM trouble codes available for the 2001-2005 Pontiac Aztek airbag control module, but generic B-codes may indicate problems that require a 2001-2005 Pontiac Aztek airbag control module repair. An accurate diagnosis requires specialized equipment or a professional service center.
- B1000 → Control unit communication error → The module cannot communicate correctly with other systems.
- B1005 → Internal error in the airbag control unit → There is a fault within the electronics of the control unit itself.
- B1010 → Airbag Deployment Circuit Malfunction → There is a problem with the circuit responsible for deploying the airbags.
- B1020 → Error in the control unit diagnostic system → The module is unable to correctly monitor or diagnose its own functions.
- B1072 → Control unit power supply error → The module receives no or unstable power supply, which may cause failure.
What part numbers are available for Pontiac Aztek 2001-2005 airbag control unit repair?
For a successful Pontiac Aztek 2001-2005 airbag control module repair or replacement, two primary OEM part numbers from General Motors are known to be 100% verified. Compatibility with the specific vehicle model must be precisely ensured to ensure full functionality and avoid further errors.
- 10342497: Original OEM airbag control unit from General Motors (GM).
- 12238360: Alternative OEM part number, also from General Motors (GM), for the same module.
- No other exact OEM part numbers from Bosch, Continental, Siemens, or Autoliv could be reliably confirmed as control units for this model.