What is a Toyota Auris E150 airbag control unit?
The Toyota Auris E150 airbag control unit is the central safety unit in your vehicle, responsible for monitoring and activating all occupant restraint systems in the event of a collision. It receives data from crash sensors, stores important information, and ensures the correct function of airbags and seatbelt pretensioners, a vital safety component.
This control unit, also called the Airbag Control Unit (ECU), is the “brain” of the passive safety system in your first generation Toyota Auris (model years 2006-2012).
It continuously monitors the system status, detects accidents, and triggers the necessary protective measures in a fraction of a second. A professional Toyota Auris E150 airbag control unit repair is therefore essential for your safety.
Why is the Toyota Auris E150 airbag control unit defective?
A Toyota Auris E150 airbag control unit often fails because it permanently stores crash data after an accident, blocking the system and signaling a malfunction. Internal electronic errors, short circuits caused by moisture, or aging can also lead to failure, causing the airbag warning light to illuminate and compromising safety.
The most common reason for a faulty control unit is the storage of "crash data" after an impact, even in minor accidents without airbag deployment.
Internal defects in the circuit board, components, or the module's software can also paralyze the airbag control unit. Such failures urgently require professional repair or replacement to restore system integrity.
Common error codes for Toyota Auris E150 airbag control unit repair
During Toyota Auris E150 airbag control unit repair, specific error codes occur that directly indicate problems in the control unit or its connected circuits, such as communication errors, faulty activation indicators or short circuits in the airbag supply lines, which are diagnosed by the control unit itself.
These codes are stored in the airbag control unit's error log and indicate the exact cause of the malfunction. A precise diagnosis is the first step toward successfully resolving the problem.
- B1000: Control Unit Communication Error - The airbag ECU has a problem with its internal communication.
- B1660: Seat Occupancy Module/Activation Indicator Faulty - A problem with the indicator or module directly associated with the airbag control module.
- B1920 to B1928: Short circuit or open circuit in airbag circuits - The control unit detects electrical problems (short circuit to ground, vehicle voltage or open circuit) in the supply lines to various airbags.
- B1941: Crash sensor circuit open - Although the sensor is affected, the airbag ECU diagnoses an open circuit in its supply.
What part numbers are available for the Toyota Auris E150 airbag control unit repair?
For Toyota Auris E150 airbag control unit repairs, several specific OEM part numbers are relevant to ensure exact compatibility with your E150 series vehicle model. These include the primary Toyota part number 89170-02560, as well as other original numbers from suppliers such as TRW or Toyota itself, which must be identified for a successful repair.
Correct identification of the part number is critical to a successful repair or replacement of your airbag control unit.
Here are the most important and verified OEM part numbers you can find for your Toyota Auris E150 airbag control unit:
- 89170-02560: This is the most common and central OEM number from Toyota itself for the Auris E150 airbag control unit, especially on 2.0 D-4D diesel models.
- 215537-106: This number is often listed as a supplier OEM number (presumably Autoliv or Bosch) and corresponds to 89170-02560 in some applications.
- 89170-0W330: Another genuine part number produced by TRW (ZF) as a supplier for Toyota Auris airbag control units.
- 8924502040: An additional OE number from Toyota, also used for airbag control units in the Auris E150 (often diesel models).
When does a Toyota Auris E150 airbag control unit repair make sense?
A Toyota Auris E150 airbag control unit repair is advisable when the fault lies primarily in the stored crash data or when there are minor electronic defects that can be repaired more cost-effectively than a complete replacement. This not only saves money but is also a more environmentally friendly alternative to buying a new unit, especially if the airbag warning light is illuminated.
If your airbag control unit reports a failure or the warning light stays on, a repair is often a cost-effective alternative to buying an expensive new part.
Especially after minor collisions in which no airbags were deployed, the module can be restored to full functionality by deleting the crash data. Entrust your Toyota Auris E150 airbag control unit repair to an experienced workshop.
The repair process for your Toyota Auris E150 airbag control unit
The repair process for your Toyota Auris E150 airbag control unit begins with a precise diagnosis to identify the exact cause of the defect, such as stored crash data or internal errors. The control unit is then professionally repaired, for example, by erasing the crash data or replacing defective components, to restore full functionality and safety.
First, the defective control unit is removed from your vehicle. This is an important step for a safe and successful Toyota Auris E150 airbag control unit repair.
At the specialist workshop, the module is then checked using special software and hardware, and any errors are corrected. This may include resetting crash data or repairing the electronics. After the repair, your control unit is ready for use again and may need to be recoded in the vehicle to ensure the full functionality of the airbag system.