What is a Volkswagen Tiguan AD1 airbag control unit?
The Volkswagen Tiguan AD1 airbag control unit is the central control unit for all airbag and restraint systems in your vehicle. It continuously monitors sensor data, evaluates impact events, and initiates the targeted deployment of the airbags and seatbelt pretensioners to ensure maximum occupant safety in an emergency.
This sophisticated control unit is critical for the Supplemental Restraint System (SRS) of your VW Tiguan II (Type AD1) from model years 2016 to 2020. It analyzes sensor information in real time to enable precise and multi-stage airbag deployment.
The proper functioning of the airbag control unit is essential for your safety. If it fails, the airbag warning light in the cockpit usually illuminates, indicating a system error that requires professional diagnosis.
Why is the Volkswagen Tiguan AD1 airbag control unit defective?
A Volkswagen Tiguan AD1 airbag control unit often fails because it stores crash data after an accident, necessitating reprogramming or repair. Internal electronic errors, short circuits, or moisture damage can also lead to failure, necessitating a Volkswagen Tiguan AD1 airbag control unit repair.
Because the control unit stores irretrievable crash data during an impact, it often needs to be repaired or replaced after an accident. This data blocks the system until it is professionally erased or reset.
Other causes of failure include internal component fatigue, voltage spikes in the electrical system, or software errors. If your airbag control unit is faulty, this can compromise vehicle safety and cause the warning light to remain permanently illuminated.
Common error codes for Volkswagen Tiguan AD1 airbag control unit repair
During Volkswagen Tiguan AD1 airbag control unit repairs, specific error codes are often read out, indicating problems with the system. These codes help identify the exact cause of a defect, whether it's a sensor failure or internal control unit damage, allowing for a targeted diagnosis.
- 01588 → Driver Side Curtain Airbag Igniter N251 Upper Limit Exceeded → This code indicates a specific problem with the driver side curtain airbag igniter.
- B200041 → Control unit defective or general checksum error → This generic code indicates an internal problem with the control unit, often defective software or hardware.
- 10485828 → Control unit defective → A general error code that indicates a malfunction of the control unit and requires further diagnosis.
It's important to note that a direct correlation between error codes and specific airbag control unit part numbers isn't always fully confirmed. Therefore, a thorough diagnostic check at the workshop is essential.
What part numbers are available for the Volkswagen Tiguan AD1 airbag control unit repair?
For the Volkswagen Tiguan AD1 airbag control unit repair, various original part numbers are relevant, which can vary depending on the year of manufacture and trim level. These numbers identify the specific control unit and are crucial for sourcing the correct replacement part or correctly repairing the existing module.
- Part number: 5Q0959655BM
- Part number: 5Q0959655CB
- Part number: 5N0959655J
- Part number: 5N0959655AA
- Part number: 5N0959655AE
- Part number: 5N0959655AB005
These part numbers are specific to the Volkswagen Tiguan model (type AD1) and are classified as airbag control units. They are crucial for Volkswagen Tiguan AD1 airbag control unit repair to ensure compatibility.
No verified part numbers from suppliers such as Bosch or Continental were found, which underlines the importance of original parts or a professional repair of the original control unit.