What is a Toyota Harrier XU60 airbag control unit?
The Toyota Harrier XU60 airbag control unit is the central safety unit in the Supplemental Restraint System (SRS), which precisely activates all occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of an accident. It continuously monitors sensors, stores relevant crash data, and ensures the proper functioning of all connected modules in the vehicle.
This electronic module is crucial for passive safety and must always function properly. It is typically located under the dashboard or in the center console.
Its main task is to process data from the crash sensors in the event of an impact. Based on this information, it deploys the airbags and seatbelt pretensioners at the optimal time to protect the occupants.
Why is the Toyota Harrier XU60 airbag control unit defective?
A Toyota Harrier XU60 airbag control unit can fail due to internal memory errors, failure to erase crash data after an accident, or electrical short circuits. This often causes the airbag warning light to illuminate and impairs system functionality, making professional repair essential.
After an accident, the control unit often stores so-called crash data, which prevents re-deployment and activates the airbag light. Without resetting or deleting this data, the system remains inactive and must be repaired.
EEPROM errors (type 93c56), communication problems, or power supply errors can also lead to failure. Such internal defects require specialized diagnostics and, if necessary, professional repair of the module.
Sometimes battery problems or accidental power outages signal a fault in the airbag control unit. This requires a thorough diagnosis to determine the exact cause of the failure and perform a proper Toyota Harrier XU60 airbag control unit repair.
Common error codes for Toyota Harrier XU60 airbag control unit repair
Toyota Harrier XU60 airbag control unit repairs often involve specific trouble codes that indicate internal module issues or stored crash data. These codes are crucial for diagnosing and fixing errors that impair airbag function and activate the warning light.
- **B1000** → Control unit communication error → Error in the internal communication of the airbag control unit.
- **B1100** → Internal memory error in the airbag control unit → Damage or defect in the internal data memory (EEPROM) of the module.
- **B1170** → Airbag diagnostic circuit error → Problems in the airbag control module's internal diagnostic or monitoring system.
- **B1180** → Airbag Deployment Circuit Fault → Defect in the circuit responsible for deploying the airbags or seat belt pretensioners.
- **B1200** → Short circuit in the airbag control unit → Internal electrical short circuit within the ECU hardware.
- **B1210** → Open circuit in the airbag control unit → Open circuit of the power supply or internal components in the module.
- **B1220** → Airbag control unit power supply error → Insufficient or unstable power supply to the airbag ECU.
- **B1230** → EEPROM error in the airbag control unit → Incorrect access or damage to the EEPROM memory (93c56).
- **B1240** → Control Unit Internal Error → A generic internal hardware or software error of the module.
- **B1810** → Driver seat airbag circuit malfunction → Problem with the specific driver airbag deployment circuit.
- **B1820** → Passenger airbag circuit malfunction → Problem with the specific passenger airbag deployment circuit.
- **B1836** → Open circuit in the right curtain airbag → Open circuit in the wiring or in the deployment circuit of the right curtain airbag.
- **B1850** → Airbag ECU internal diagnostic error → A specific error in the airbag control unit's self-diagnosis system.
- **B1900** → Memory full / Memory error → Overfilled or faulty memory, often due to too many entries or defects.
- **B1990** → Crash data or deploy data stored → Airbags deployed after an accident, the data for which is stored in the control unit and must be deleted.
These codes are specific to the airbag control module and do not indicate problems with sensors, seatbelt pretensioners, or seat occupancy mats. For example, a B1990 code means crash data is stored and the module needs a reset to function again.
A professional diagnostic tool like the Toyota Techstream is essential for accurately diagnosing these trouble codes, as simple OBD-II scanners often fail to detect specific airbag DTCs. This makes Toyota Harrier XU60 airbag control unit repair difficult without appropriate workshop equipment.
What part numbers are available for the Toyota Harrier XU60 airbag control unit repair?
For Toyota Harrier XU60 airbag control unit repairs, part numbers such as 89170-48050 and 89170-48060 are primarily relevant, as they operate on a similar hardware basis with EEPROM 93c56 memory. However, due to the lack of official confirmation, caution is advised and verification before purchase is strongly recommended.
Research revealed a possible part number, 89170-48050-93C56, albeit from an unofficial source. The number 89170-48060 is also frequently mentioned for the Harrier XU60 and is based on similar technology and memory modules.
For reliable procurement, direct access to official Toyota parts catalogs for the XU60 model is recommended. Professional spare parts databases such as TecDoc/TecAlliance or direct contacts with suppliers also provide validated compatibility information.
Before any Toyota Harrier XU60 airbag control unit repair, it is crucial to verify part number compatibility with multiple independent sources. This ensures that the replacement part actually fits the specific vehicle model and year, preventing further safety system errors or failures.